User Manual

FS1-X v1.1 www.aja.com

When you edit a parameter containing multiple values, such as the IP address, the value

currently being edited blinks.

Operational Summary The nine front panel pushbuttons allow you to select display menu groups. The two

knobs allow you to change menus and set parameters within the menu groups. These

functions can be summarized as follows:

• Select a menu group: Press one of the ten pushbuttons.

• Scroll through menus in a group: Turn SELECT.

• Edit a menu parameter: Stop SELECT on the menu.

• Change a parameter value: Once the parameter is selected with SELECT, turn ADJUST to

set the value. Changes apply in a few seconds.

• To edit a multiple part parameter, such as the IP address, push the ADJUST knob

momentarily (the value blinks). To save the whole parameter after editing, push

ADJUST momentarily again.

• Coarse adjust a value: Hold down the menu group button (the button turns blue) and

turn ADJUST.

• Undo a change (restore previous setting): Push SELECT momentarily.

• Reset to factory default: Hold down ADJUST for 4 seconds.

Pushbuttons The general rules of Menu Group button operation are:

• Press one of the nine Menu Group buttons to access the associated menu group. The

SELECT and ADJUST knobs control the display menus.

• The selected Menu Group button lights and the other buttons turn off.

• Each menu group returns to the last menu changed when you select the button. After a

reboot, each group displays its first menu.

• Hold down a button (turns blue) to make coarse adjustments using the Adjust knob.

Release the button to make fine adjustments.

The following text briefly lists the functions accessed by each pushbutton:

STATUS Displays the Status Menu Group, which shows current machine status and error

conditions:

• Video 1, Video 2, and Caption status

• Reference and Genlock status

•Output Status

• Power and Temperature status

•System Name display

•Alarms

•FRC status

• Audio Output routing

REMOTE Displays the Remote Menu Group, which lets you select how to control the FS1-X:

• Control by local front panel, or local and remote

• Authentication

• GPI input and output behavior

CONFIG Displays the Config Menu Group, which lets you configure the FS1-X for your

environment:

• System Name setting