User Manual

FS1-X v1.1 www.aja.com

be changed using SELECT and ADJUST, and the take or switch to the new value occurs

when you press ADJUST momentarily. Examples: Preset Save/Recall.

• Multiple field parameter menus—contain a parameter number and name on line 1 and

its current value setting on line 2, consisting of multiple letter or number fields that

must each be set individually. The line 2 fields can be changed using SELECT and

ADJUST. Example: IP Address.

• Hidden parameter menus—a “parent” menu exists that, when that parent parameter is

turned on, can display “child” menus of related parameters. When the Hidden Menus

parameter is set to Hide Inactive, these child menus are hidden when the parent

parameter is off. Some menu names contain a decimal (dot) number and zero, which

indicates there are a group of related parameters. Example: 12.0 ProcAmp is the parent

menu of the 12.1 through 12.4 child menus.

Menu Operation

Examples

The following examples demonstrate typical menu operation. After this section, each

Menu Group is described in detail.

Status Pages These steps explain how to surf the STATUS menus.

1. Press the STATUS Menu Group button.

2. Turn the SELECT knob forward and backward to display the Status pages. The display

scrolls through the pages as you turn the knob. The Status displays simply show the

status of important FS1-X operational parameters.

Simple Menus: Config

Format Alarm Filters

These steps explain how to surf and change simple menus, such as the Power Supply

Alarm Filters.

1. Press the CONFIG Menu Group button.

Press STATUS button and

turn SELECT knob to scroll

through Status pages.

Settings cannot be changed.

SELECT ADJUST

IN1 SDI1 1080i59

OUT1 525i59

IN2 SDI2 1080i59

OUT2 525i59

Current Settings