User Manual

FS1-X v1.1 www.aja.com
64
Dual Link Dual Link referred to here is 1080p50/59.94 on two 1.5 Gb HD-SDI connections. Selecting
Dual Link as the Video Input for Video Processor 1 or 2 will allocate both SDI Inputs for
Dual Link use. Both Processors can use the Dual Link Input, or if only one Processor is
using it, the other Processor is free to select another input. The Fiber inputs operate the
same way.
1.2 Video 2 Input Same settings as above, but affects Video Processor 2.
2 Output Format This parameter defines the output format of the Video Processor 1. Available choices
depend on the frame rate selection.
Output Format Selection
Constraint
Available frame rates depend on System menu “9 Output Frame Rates” on page 60
parameter setting.
Output Timing Memory Changing the Output Format selection automatically selects new values for H & V timing
parameters (see
“Timing and Delay” on page 65). Each Output Format mode remembers
its own H and V timing settings.
Output Format Mapping The Output Format selection is remembered for each of the frame rates. If you change
the Output Frame Rate (
“9 Output Frame Rates” on page 60), the Output Format setting
associated with the newly selected frame rate is recalled.
3 Video 1 Output Mode The parameter sets the final video output of Video Processor 1 to normal video or the test
pattern generator. Alarms occur if conflicting video formats are selected.
NOTE: Normal output for the Video Processor 1 can be a version of its currently selected input, a
Sidebar or Letterbox display, a Freeze of last good video, or Black, depending on how the
Video 1 process or has been configured.
Loss of Input This parameter selects the automatic action that occurs if the video input is lost. The
Black selection (default) cuts the video to black. The Freeze selection freezes video on the
last available good frame.
4.1Video 1 Loss of
Input
4.2 Video 2 Loss of
Input
Same settings as above, but affects Video Processor 2.
Follow INPUT (default)
Follow REF
525i/625i<frame rate>
720p<frame rate>
1080i<frame rate>
1080PsF<frame rate>
1080p<frame rate>
2K1080p<frame rate>
Follow the format of the selected Video Processor 1 input.
Note: The Video Processor 2 output format always follows the
Video Processor 2 input format.
Follow the format of the reference input (Ref).
Select 525i/625i SD as the output.
Select 720p HD as the output.
Select 1080i HD as the output.
Select 1080PsF HD as the output.
Select 1080p HD as the output.
Select 2K1080p HD as the output.
Normal (default)
Test Pattern
Normal video is output from the processor.
The output of the test pattern generator.
Black (default)
Freeze
Switches to black if input video is lost.
Freezes on the last available good video frame if input is lost.