HDP2 Mini-Converter HD/SD-SDI to DVI-D Installation & Operation Guide Version 1.
Table of Contents Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Trademarks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Copyright . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Contacting Support . . . . . . . . . . . . . . . . . . . .
Appendix B: Safety and Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . .21 Federal Communications Commission (FCC) Compliance Notices . . . . . . . . . . . . . . . . . . Class A Interference Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . FCC Caution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Canadian ICES Statement . . . . . . . . . . . . . . . . .
Notices Trademarks AJA®, lo®, Ki Pro®, KONA®, KUMO®,T-TAP®, Because it matters.® and ROI® are registered trademarks of AJA Video Systems, Inc. in the United States. AJA and Ki Pro are trademarks of AJA Video Systems, Inc. registered in other countries. AJA Control Room™, CION™, Corvid Ultra™, FiDO™, Science of the Beautiful™, TruScale™, TruZoom™, V2Analog™ and V2Digital™ are trademarks of AJA Video Systems, Inc.
Chapter 1: Introduction Overview The HDP2 is a miniature HD/SD-SDI to DVI-D converter for digital display devices (graphics and video), such as LED, LCD, DLP and Plasma monitors (and projectors). Using a very high quality scaling engine, the HDP2 will automatically size 4:3 or 16:9 inputs to many DVI-D monitors. For appropriate monitor configurations, scaling is automatically 1 to 1—for example, displaying 1920x1080 video on a WUXGA (1920x1200) monitor.
• High quality scaling engine for proper display of 4:3 or 16:9 content—even better quality than original HDP • 1 to 1 scaling for appropriate monitor configurations • 2 channel RCA analog audio output (user-assignable channel pairs) • HD/SD-SDI looping output • Setup via PC/Mac using USB port and supplied USB cable (USB configuration software application supplied on CD) • 5 year warranty About Monitor Compatibility The HDP2 is designed to work with most DVI-D monitors.
Optimal Performance with HP LP2480zx DreamColor When using the HDP2 with an HP LP2480zx, the best results are obtained by using the default HDP2 “Auto” selections (no action required—unless you’ve changed the factory defaults using the Mini Config software supplied). Automatic 720p or 1080p Support Monitors that report 1280x720 or 1920x1080 in their “Preferred Timing Mode” section of EDID readback will receive a 1280x720 or 1920x1080p signal, respectively, from the HDP2.
Video Scaling As shown in the graphic below, the HDP2 will scale the input video to the best fit for a given monitor and video input. In cases where the input video and the monitor are already the same or similar, the HDP2 automatically turns off scaling. For example, a 1920 x1080 video and a 1920 x1200 monitor will not be scaled.
Frame Rates When the HDP2 is manually configured for a particular output frame rate, the output will run in lock-step with the video input. For best results, (without any added or dropped frames), select an output frame rate that matches the incoming video frame rate.
Installation Typically, HDP2 installation consists of the following steps: 1. Ensure the converter is disconnected from power. 2. Connect video equipment to the converter BNC and DVI connector.s 3. Connect audio equipment to RCA connectors (optional) 4. Apply power to the converter (AJA power supply included). 5. The converter will now run using the default factory settings.
Chapter 2: Operation USB Control and Setup—Using AJA MiniConfig The HDP2 can usually be used right out of the box for most applications since it is designed to recognize inputs and perform standard actions automatically by default. However you can also manually configure the unit using a supplied software application for PCs and Macs called “MiniConfig.” This same application can be used to update MiniConverter firmware released by AJA.
PC Startup To run MiniConfig on a PC, find the AJA MiniConfig in the program list and locate the AJA MiniConfig application. Figure 2. PC MiniConfig Startup Mac Startup To run MiniConfig on a Mac, double-click the Applications folder and locate the AJA MiniConfig application. Double-click the application to launch it. Figure 3. Mac MiniConfig Startup NOTE: On a Mac, when the Mini-Converter is connected to the USB port, you may see an alert like that shown below.
• Red text indicates the Mini-Converter is not detecting a signal or cannot negotiate with the attached device NOTE: Even if no output device is detected, it still shows the signal it is outputting. NOTE: Configuration settings in red will change based on the attached output device as well as input signals. For improved accuracy and reliability, you should configure the Mini-Converter only when the target output device is attached and input signals are supplied at the inputs.
When configuring the Mini-Converter, select it from the top pulldown, view the current settings and change any values. Making a change communicates that new value to the Mini-Converter’s non-volatile memory. Tabbed Screens The Tabs delineate control screens with groups of controls for each type of task to be performed. The controls for the actual configuration parameters are specific to each Mini-Converter type. Click on any of the tab buttons and the screen below will change to match.
Scaling: Choose Auto to let the HDP2 choose based on the attached output device’s capabilities, 1:1 for no scaling, or Scale, to let the HDP2 scale for the attached monitor. Displaying 1:1 only works properly when it is possible to display the entire unscaled raster. For example, it is not possible to display a 1920 x 1080 input on a 1600 x 1200 monitor. For optimal performance with 1:1 scaling, use a 1920 x 1200 (WUXGA) monitor.
Update Tab Screen NOTE: Use this Update screen to view the software version currently installed on the HDP2 or install new software. When discussing Mini-Converters, “Firmware” is software that will be stored in the MiniConverter’s non-volatile memory and used when it is powered up. This is something different than the Mini Config application software. The version numbers shown in the Update screen refer only to the firmware.
Converter; progress will be shown via the “Progress” thermometer bar. When you click Update, Mini Config will provide a dialog asking you to confirm that you really want to update the firmware/ Info Tab Screen This screen provides basic information about the Mini-Converter. This information is mostly useful when calling AJA Support for service or technical support. Name: Type: Assembly: Serial Number: HDP2 Mini-Converter v1.4r1 this field allows you to give your Mini-Converter a name.
HDP2 Mini-Converter v1.4r1 18 www.aja.
Appendix A: Specifications Video Input • HD/SD-SDI (auto-selected), SMPTE-259/274/292/296, 1 x BNC Input Formats • 1080p 23.98, 24, 25, 29.97, 30 • 1080psf 23.98, 24, 25, YCbCr 10-bit • 1080i 25, 29.97, 30 • 720p 50, 59.94, 60 • 525i • 625i Video Output • DVI v1.0 / HDMI v1.
Environment Operating Temperature: Operating Relative Humidity: Operating Altitude: Safe Storage Temperature (Power OFF): HDP2 Mini-Converter v1.4r1 0 to 40 degrees C (32 to 104 degrees F) 10-90% non-condensing <3,000 meters (<10,000 feet) -40 to 60 degrees C (-40 to 140 degrees F) 20 www.aja.
Appendix B: Safety and Compliance Federal Communications Commission (FCC) Compliance Notices Class A Interference Statement This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15, Subpart B of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
European Union and European Free Trade Association (EFTA) Regulatory Compliance This equipment may be operated in the countries that comprise the member countries of the European Union and the European Free Trade Association.
Korean KCC Compliance Statement Taiwan Compliance Statement This is a Class A product based on the standard of the Bureau of Standards, Metrology and Inspection (BSMI) CNS 13438, Class A. Japanese Compliance Statement This is a Class A product based on the standard of the VCCI Council (VCCI V-3/2008.04). If this equipment is used in a domestic environment, radio interference may occur, in which case, the user may be required to take corrective actions.
Translated Warning and Caution Messages The following caution statements, warning conventions, and warning messages apply to this product and manual. Before Operation Please Read These Instructions Warning! Read and follow all warning notices and instructions marked on the product or included in the documentation. Avertissement ! Lisez et conformez-vous à tous les avis et instructions d'avertissement indiqués sur le produit ou dans la documentation.
Warning! Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. Avertissement ! Ne bloquez aucune ouverture de ventilation. Suivez les instructions du fabricant lors de l'installation. Warnung! Die Lüftungsöffnungen dürfen nicht blockiert werden. Nur gemäß den Anweisungen des Herstellers installieren. ¡Advertencia! No bloquee ninguna de las aberturas de la ventilación. Instale de acuerdo con las instrucciones del fabricante.
Warning! Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
Warning! Since the Mains plug is used as the disconnection for the device, it must remain readily accessible and operable. Avertissement! Puisque la prise principale est utilisée pour débrancher l'appareil, elle doit rester aisément accessible et fonctionnelle. Warnung! Da der Netzstecker als Trennvorrichtung dient, muss er stets zugänglich und funktionsfähig sein.
Warning! Unplug this device during lightning storms or when unused for long periods of time. Avertissement! Débranchez cet appareil pendant les orages avec éclairsou s'il est inutilisé pendant de longues périodes. Warnung! Das Gerät ist bei Gewitterstürmen oder wenn es über lange Zeiträume ungenutzt bleibt vom Netz zu trennen. ¡Advertencia! Desenchufe este dispositivo durante tormentas eléctricas o cuando no se lo utilice por largos periodos del tiempo.
Warning! This device is a Class A product. Operation of this equipment in a residential area is likely to cause harmful interference, in which case users will be required to take whatever measures may be necessary to correct the interference at their own expense. Attention! Le périphérique est un produit de Classe A. Le fonctionnement de cet équipement dans une zone résidentielle risque de causer des interférences nuisibles, auquel cas l'utilisateur devra y remédier à ses propres frais.
Warning! Disconnect the external AC power supply line cord(s) from the mains power before moving the unit. Avertissement! Retirez le ou les cordons d’alimentation en CA de la source d’alimentation principale lorsque vous déplacez l’appareil. Warnung! Trennen Sie die Wechselstrom-Versorgungskabel vom Netzstrom, bevor Sie das Gerät verschieben. ¡Advertencia! Cuando mueva la unidad desenchufe de la red eléctrica el/los cable(s) de la fuente de alimentación CA tipo brick.
Warranty Information Limited Warranty AJA Video Systems, Inc. (AJA Video) warrants that this product will be free from defects in materials and workmanship for a period of five years from the date of purchase. If a product proves to be defective during this warranty period, AJA Video, at its option, will either repair the defective product without charge for parts and labor, or will provide a replacement in exchange for the defective product.
