User Manual
Table Of Contents
- Installation & Operation Guide
- Trademarks
- Copyright
- Contacting Support
- Overview
- System Requirements
- What’s In The Box?
- In This Manual
- Installation Overview
- Connecting to your Computer
- Installing Io XT/4K Software
- Using Io XT/4K with Professional Video /Audio Software
- AJA Control Panel Overview
- Control Panel Operation
- Using Io 4K for UHD/4K
- If You Run Into Problems
- Updating Software
- Support
- Io XT Specifications
- Io 4K Specifications
- Machine Control
- Appendix B: Safety and Compliance
- Federal Communications Commission (FCC) Compliance Notices
- Canadian ICES Statement
- European Union and European Free Trade Association (EFTA) Regulatory Compliance
- Korean Compliance Statement
- Taiwan Compliance Statement
- Japanese Compliance Statement
- Translated caution statements, warning conventions and warning messages
- Before operating your AJA unit, read the instructions in this document
- Limited Warranty
- Limitation of Liability
Io XT/4K v10.5r2 www.aja.com
47
Info Screen This screen shows the Io XT/4K software files that have been installed on your system.
This information may be needed if you talk to an AJA Customer Service representative to
determine if files are missing or need updating.
Figure 44. Information Screen in Standard Mode
Using Io 4K for UHD/4K
In 4K Mode, you can input or output four channels of video representing individual
quadrants of Ultra-HD (3840x2160) and 4K (4096x2160) formats. The Io 4K employs all
four bi-directional SDI connectors for either input or output It cannot support the input
and output at the same time.
Physical connections of the quadrants will be mapped to the Io 4K SDI connectors as
shown in the following screens. For the HDMI, you can choose full, quarter, or one of the
quadrants for viewing (see “HDMI Screen in 4K Mode” on page 50 HDMI output selection).