Specifications

40
17.4 CLIP APPEND
This parameter is used with parameter 17.5 ALPHA APPEND to append a text value
after the CLIP NUMBER or have no text appended.
17.5 ALPHA APPEND
This parameter is used with parameter 17.4 CLIP APPEND to append a text value after
the CLIP NUMBER.
17.8 TAKE
This parameter determines the TAKE number, from 1 to 999, that follows the CLIP
NAME and CLIP NUMBER, followed by any ALPHA APPEND (if selected), generated for
all clips while using this setting.
There are rules that Ki Pro observes in relation to Clips and Takes:
1. Ki Pro will not overwrite an existing clip.
2. The Take number will auto-increment past existing numbers for the “prefix” as
defined by the Reel Name, Clip Name, Clip Number, Clip Append, Alpha
Append, and Take settings.
3. If the number is at “999” , Ki Pro will not auto-increment; instead it will register
a “Name In Use” alarm. This prompts you to select a new Clip Name, Clip
Number, Clip Append, Alpha Append, and/or Take settings so that a new
unique “prefix” is created. This action ensures files are unique and
understandable, and that clips are never overwritten.
CONFIG menus
When we talk about menus, we discuss the Parameter Number and Name on the top
line of the display and the Parameter Setting(s) possible as shown on the bottom line
of the display; remember, the current setting is what is shown.
As in the MEDIA menus already presented, pressing one of the parameter Adjust
buttons changes the current CONFIG parameter’s value to a new one from the Ki Pro’s
list of choices—repeating the list if you continue to press Adjust—or adjusting a
numerical value up or down.
17.4 CLIP APPEND NONE (default)
ALPHA
No text is appended to the CLIP NAME and
CLIP NUMBER
The text value entered in ALPHA APPEND is appended
to the CLIP NAME and CLIP NUMBER
17.5 ALPHA APPEND A to Z
(default = A)
Press ADJUST button up or down to change the
ALPHA APPEND value from A to Z. Alphabetic
values increment with A and Z wrapping around.
17.8 TAKE 1 to 999
(default = 1)
Ki Pro automatically generates a TAKE number.
Press ADJUST button up or down to change the
TAKE value from 1 to 999, if a value other than the
automatically generated value is desired.