Specifications

1
55
Ki Pro Installation and Operation Manual — CONFIG menus
Caution!
Selecting this parameter and recalling factory defaults will overwrite the current settings
(with the exception of network settings, which are retained).
Recalling factory defaults does not affect these network settings: IP Config,
IP Address, Subnet Mask, Default Gateway, System Name, 802.11 settings, or Date and
Time. To clear network settings and recall factory defaults, hold down both the Adjust
(up) and Adjust (down) buttons at the same time.
Note: To set a single parameter to its factory default value, go to that parameter and hold
down both the Adjust (up) and Adjust (down) buttons at the same time.