Installation and Operation Manual

KONA Capture, Display, Convert v15.5 20 www.aja.com
Figure 13. KONA 5 Only, ATX Power Connection
PC Internal ATX
Power Connector
1, 2, 3 = +12v
4, 5, 6 = COM
(Molex p/n 45559-0002)
11. Secure the card in the chassis.
12. Close the chassis.
13. Power up the chassis.
NOTE: Always put a RAID controller and KONA on separate PCIe buses. This improves
performance by reducing bus contention.
Cabling the System
KONA 5 Example Cable Connections
Figure 14. Typical KONA 5 System Connections, 4K Mode
Digital VTR with SDI In/Out
BNC Adapter
SDI cables
Multi-pin KONA
Card Connector
1
4
R
Reference
Input
Reference
Input
Reference
Input
LTC Output BNC
LTC Input BNC
RS-422 Machine
Control (9-pin)
AES
Audio Input
BNCs Ch1-8
(2 channels/
connector)
AES
Audio Output
BNCs Ch1-8
(2 channels/
connector)
HDMI Display for
4K/UltraHD with
Deep Color, HDR, HFR
Video Display for
2K/HD
Downconvert
Genlock Reference
Computer
Monitor
Workstation Computer
with Video Editing
Application Installed
KONA 5 Card
(in computer)
3
Professional 12G-SDI
Video Camera
12G-SDI Video
12G-SDI Video
3G-SDI Video
HDMI Output Cable
12G-SDI Video
Production Switcher