Installation and Operation Manual

KONA Capture, Display, Convert v15.5 68 www.aja.com
Figure 36. Audio Mixer Screen Example, KONA 4 in 4K Mode
Each source has a confidence meter, which enables you to tell immediately if you
have a source arriving correctly at the AJA hardware (without having to launch
any other software). The level sliders allow a simple plus or minus adjustment to
the Source level being monitored. This is to allow for fine-tuning of your listening
environment (on occasions the host system audio can be unexpectedly loud, or
an incoming feed may be very loud or very quiet).
Two different Audio Mixer screens are available, selected by clicking on the
Capture Monitor or Playback Monitor tabs. During capture operations, the
Capture tab is used for your monitoring experience. During regular editing, the
Playback tab is used to control your monitoring experience.
Controls in each tab are only in effect when KONA is in the correct operating
mode, as determined by the controlling application or the Control Panel
application's Default Output setting. When the mode doesn't match, the mode
indicator on the right goes red (see Figure 36). However, settings can be adjusted
while in that disabled mode, and will be applied when you return to that
operating mode.