Installation and Operation Manual

KONA Capture, Display, Convert v15.5 74 www.aja.com
For Quadrant signals, the HDMI output will display only a quadrant of the entire
image. You can select which quadrant is shown using the HDMI menu, or by right
clicking on the HDMI output connector on the Control Panel UI to display a drop-
down list.
For 2SI signals, the HDMI output displays a down-sampled version of the entire
image.
Pixel Format
KONA 5 in 8K Mode does not support color space conversion. This means you
must manually match the colorspace in your controlling application to the KONA
card's selected pixel format.
SDI Output Screen in 8K Mode
Figure 39. AJA Control Panel, KONA 5 SDI Output Screen in 8K Mode
8K Transport
KONA 5 operating in 8K Mode adds the following 8K Transports:
• Auto
• 8K-2SI
• 2x 8K Quad
• 4x 8K Quad
• 1x 8K Quarter
The KONA 5 HDMI output signal will be affected by this selection. See "HDMI
Screen in 8K Mode (KONA 5 only)" on page 75.