Installation and Operation Manual

KONA Capture, Display, Convert v15.5 80 www.aja.com
*These formats are dependent on specific software functionality and are not
normal over the wire formats.
Video Input Digital
3G-SDI, SMPTE-259/292/296/424/425, 8-bit, 10-bit and 12-bit*
4K/UltraHD 4:2:2 and 4:4:4 up to 50/60 fps
Dual Link HD 4:4:4 (2x BNC)
Single Link 4:2:2 or 4:4:4 (1x BNC)
1D LUT support
*Bit depth support is application dependent. Check with your software
manufacturer for compatibility.
Video Output Digital
3G-SDI, SMPTE-259/292/296/424, 8-bit, 10-bit and 12-bit*
4K/UltraHD 4:2:2 and 4:4:4 up to 50/60 fps
Dual Link HD 4:4:4, (2x BNC)
Single Link 4:2:2 or 4:4:4 (1x BNC)
HDMI v1.4b
30/36 bits/pixel, RGB or YUV, 2.25 Gbps
2K, HD, and SD, UltraHD with HFR support up to 60p 4:2:0
HDR 10 Support - HDR Infoframe metadata, in accordance with HDMI 2.0a/
CTA-861.3
HLG Support - in accordance with HDMI 2.0b/CTA-861-G**
*Bit depth support is application dependent. Check with your software
manufacturer for compatibility.
**HLG support is application dependent. Check with your software manufacturer
for compatibility.
Video Output Analog
Composite/S-Video (Y/C) (1x BNC/2x BNC+adapter)
NTSC, NTSCJ, PAL
Component (3x BNC)
HD: YPbPr, RGB
SD: YPbPr, RGB (component mode)
SMPTE/EBU N10, Betacam 525 line, Betacam 525J, RGB
12-bit D/A, 8x oversampling
+/- .2 dB to 5.0 MHz Y frequency response
+/- .2 dB to 1 MHz C frequency response
5% 2T pulse response
<1% Diff Phase
<1% Diff Gain
<1% ns Y/C delay inequity
Audio Input Digital
16-Channel 24-bit SDI embedded audio, 48 kHz sample rate, synchronous
16-Channel 24-bit AES/EBU audio, 48 kHz sample rate, synchronous (via 8 x
BNC on optional K3G-Box)
8-Channel 24-bit AES/EBU audio, 48 kHz sample rate, synchronous or
nonsynchronous, internal sample rate conversion (via 4x BNC on breakout
cable)