Installation and Operation Manual

KONA Capture, Display, Convert v15.5 81 www.aja.com
Audio Output Digital
• 16-Channel 24-bit SDI embedded audio, 48 kHz sample rate, synchronous
• 16-Channel 24-bit AES/EBU audio, 48 kHz sample rate, synchronous (via 8 x
BNC on optional K3G-Box)
• 8-Channel 24-bit HDMI embedded audio, 48 kHz sample rate, synchronous
• 8-Channel 24-bit AES/EBU audio, 48 kHz sample rate, synchronous or
nonsynchronous, internal sample rate conversion (via 4x BNC on breakout
cable)
Downstream Keyer
• Supports graphics up to 2K/HD with alpha channel over video, matte or
framebuffer, or framebuffer content over incoming video or matte
SD to SD Aspect Ratio Conversion
• Letterbox: This transforms SD anamorphic material to a letterboxed image
• H Crop: Will produce a horizontally stretched effect on the image; transforms
anamorphic SD to full frame
• SD Pillarbox: Will produce an image in the center of the screen with black
borders on the left and right sides and an anamorphized image in the center
• V Crop: Will transform SD letterbox material to an anamorphic image
Timecode
• LTC timecode input and output (via 1x BNC each)
Reference Input
• Analog color black (1V) or composite sync (2 or 4V)
• Looping
• 75 ohms on optional K3G-Box, terminated on supplied breakout cable
Electrical Interface
• 8-lane PCIe 2.0
Machine Control
• RS-422, Sony 9-pin protocol (via breakout cable or optional K3G-Box)
• 9-pin D-connector pinout is as follows:
1 GND
2 RX-
3 TX+
4 GND
5 No Connection
6 GND
7 RX+
8 TX-
9 GND
Shell GND
Size (w x d x h)
• .75" x 6.9" x 5.0" (19.05mm x 175.26mm x 127mm)
Weight
• 0.7 lb (0.4 kg)