Instruction manual

40
Audio Input—This pulldown menu allows you to pick where the audio comes
from. KONA LS supports up to 6 channels of embedded digital audio, so you
can choose out of the 16 channels that can be embedded in SDI, and pick
which 6 to bring in (from the group 1-8 or 9-16). Since Final Cut Pro currently
only supports two channels of audio, here you can also select which two
channels from the 8 embedded will be mapped to Final Cut’s two channels.
Proc Amp Screen The Proc Amp screen settings affect the analog proc amplifier built into the KONA
LS. Each of the four sliders controls a video parameter, with the middle being close
to unity. If the value has been changed from the factory Unity setting, that value will
by displayed in red at the right side of the slider. Clicking the Reset Unity button
sets all four sliders back to unity.
Sliders:
Brightness
Contrast
Hue
Saturation
KONA LS Control Panel, Proc Amp Tab