Datasheet

| KONA
www.aja.com
19
Machine Control
• RS-422, Sony 9-pin protocol (via breakout cable or optional KLHi-Box)
• 9-pin D-connector pinout is as follows:
1 GND
2 RX-
3 TX+
4 GND
5 No Connection
6 GND
7 RX+
8 TX-
9 GND
Shell GND
Tech Specs (Continued)
Reference Input
• Analog Color Black (1V) or Composite Sync (2 or 4V)
• Looping
• 75 ohm on optional KLHi-Box, terminated on supplied breakout cable
Up-Conversion
• Hardware 10-bit
• Anamorphic: full-screen
• Pillar box 4:3: results in a 4:3 image in center of screen with black
sidebars
• Zoom 14:9: results in a 4:3 image zoomed slightly to fill a 14:9 image
with black side bars
• Zoom Letterbox: results in image zoomed to fill full screen
• Zoom Wide: results in a combination of zoom and horizontal stretch to
fill a 16:9 screen; this setting can introduce a small aspect ratio change
Cross-Conversion
• Hardware 10-bit
• 1080i to 720P
• 720P to 1080i
• 720P to 1080PsF
Down-Conversion
• Hardware 10-bit
• Anamorphic: full-screen
• Letterbox: image is reduced with black top and bottom added to image
area with the aspect ratio preserved
• Crop: image is cropped to fit new screen size
SD to SD Aspect Ration Conversion
• Letterbox: This transforms SD anamorphic material to a letterboxed
image.
• H Crop: Will produce a horizontally stretched effect on the image;
transforms anamorphic SD to full frame
• SD Pillarbox: Will produce an image in the center of the screen with
black borders on the left and right sides and an anamorphized image in
the center
• V Crop: Will transform SD letterbox material to an anamorphic image.
For full product specifications visit www.aja.com/kona-lhi/techspecs
Click here
Click here
Audio Output Analog
• 2-channel, 24-bit D/A analog audio, 48kHz sample rate, balanced (via 2
x XLR on breakout cable or optional KLHi-Box)
• +24 dBu Full Scale Digital (0 dBFS)
• +/- 0.2 dB 20Hz to 20kHz Frequency Response
• 2-channel unbalanced output (via 2 x RCA jacks on optional KLHi-Box)
Video Input Analog
• Composite/S-Video (Y/C) (1 x BNC/2x BNC+adapter)
• NTSC, NTSCJ, PAL
• Component (3 x BNC)
• HD: YPbPr, RGB
• SD: YPbPr, RGB (component mode)
• SMPTE/EBU N10, Betacam 525 line, Betacam 525J, RGB
• 12-bit D/A, 8x oversampling
• +/- .2 dB to 5.0 MHz Y Frequency Response
• +/- .2 dB to 1 MHz C Frequency Response
• .5% 2T pulse response
• <1% Diff Phase
• <1% Diff Gain
• <1 ns Y/C delay inequity
Audio Input Analog
• 2-channel, 24-bit A/D analog audio, 48kHz sample rate, balanced (via 2 x
XLR on breakout cable or optional KLHi-Box)
• +24 dBu Full Scale Digital
• +/- 0.2 dB 20Hz to 20kHz Frequency Response
Audio Output Digital
• 8-channel, 24-bit SDI embedded audio, 48kHz sample rate,
Synchronous
• 8-channel, 24-bit HDMI embedded audio, 48kHz sample rate,
Synchronous
• 2-channel, 24-bit AES/EBU audio, 48kHz sample rate, Synchronous
or Non-synchronous, Internal sample rate conversion (via 1 x XLR on
breakout cable or optional KLHi-Box)