Instruction manual

10
Cable Connections
KONA LH offers unsurpassed cable connectivity for a video/audio capture card.
Connections are made via a supplied breakout cable and three BNCs on the KONA
LH Card endplate.
Using the
Breakout Cable
and 3 BNCs
The breakout cable supports:
• Reference Input (BNC)
• Component/Composite/S Video Input (3x BNC)
• Component/Composite/S Video Output (3x BNC)
• AES In (2x XLR)
• AES Out (2x XLR)
• Balanced Audio In (2x XLR)
• Balanced Audio Out (2x XLR)
• RS-422 Machine Control (9 pin D)
The three BNCs on the KONA LH Card endplate additionally provide:
• Standard and High-definition SDI input (BNC)
• 2 SDI outputs (2x BNC, independent outputs)
KONA LH Breakout Cable
6 BNCs (Analog Connections):
Can be Configured for
Component,
Composite,
or Y/C
Reference Input BNC
RS422
Machine Control
to VTR
(9-pin)
SDI Input BNC
SDI Output 1 BNC
SDI Output 2 BNC
Y/CVBS In BNC
Pb/Y In BNC
Pr/C In BNC
Y/G/CVBS Out BNC
Pb/B/Y Out BNC
Pr/R/C Out BNC
green
blue
red
green
blue
red
Analog Audio
Channel 1 Input
Analog Audio
Channel 2 Input
Analog Audio
Channel 1 Output
Analog Audio
Channel 2 Output
AES Input
Channels 1 & 2
AES Output
Channels 1 & 2
60-pin connector
To KONA LH
Balanced Audio
Analog Video
SD-SDI/HD-SDI
Video/Audio