Instruction manual

1
29
KONA LH/LHe Installation and Operation Manual — Cabling the System
Cabling the System
System Video/
Audio Cable
Connections
When installing your system, you’ll make video and audio input/output connections.
These connectors are explained individually in chapter 2. Here, system interconnection
is shown and described.
System Cabling When Using The Breakout Cable
KONA LH System Using The Breakout Cable
6 BNCs (Analog Connections):
Can be Configured for
Component,
Composite,
or Y/C
Standard Breakout Cable
KONA LHe
Installs in
PCI-Express Slot
in G5
KONA LH
Installs in
PCI-X slot
in G5
Reference Input BNC
RS422
Machine Control
to VTR
(9-pin)
SDI Input BNC
SDI Output 1 BNC
SDI Output 2 BNC
Y/CVBS In BNC
Pb/Y In BNC
Pr/C In BNC
Y/G/CVBS Out BNC
Pb/B/Y Out BNC
Pr/R/C Out BNC
green
blue
red
green
blue
red
Analog Audio
Channel 1 Input
Analog Audio
Channel 2 Input
Analog Audio
Channel 1 Output
Analog Audio
Channel 2 Output
AES Input
Channels 1 & 2
AES Output
Channels 1 & 2
60-pin connector
To KONA LHe
Balanced Audio
Analog Video
SD-SDI/HD-SDI
Video/Audio