Instruction manual

1
47
KONA LH/LHe Installation and Operation Manual — Using The KONA LH
the aspect ratio preserved
Crop: image is cropped horizontally to fit new screen size
Digital Out Screen The Digital Out screen shows the current settings for both the SDI outputs. If an
input/output has no video, it will be indicated on the block diagram (“No Video”).
KONA LH Control Panel, Digital Out Tab
Digital Out Screen Settings
Separate information panes will be listed (as applicable) for SDI Outputs 1 and 2.
Information that can appear includes the following items. You can view the current
setting or click on another to change to it:
Primary—when selected, this indicates that the SDI output is set to the same format
as the framebuffer. That value will be listed in blue.
Secondary—when selected, this indicates that the SDI output is set to a format
different from the framebuffer (Primary Format). That secondary format value
will be listed in green. This shows that active processing of the video is taking
place (format change and possibly down-conversion).
Video+Key—when selected, this indicates that the SDI output 1 video is set to the
same format as the framebuffer. SDI output 2 is set to a video key signal
associated with output 1 (the shape of the hole to cut). Using the second KONA
output as an Alpha Channel key, with the video output, may be useful for feeding
production switchers, DVEs or other professional video equipment.