Instruction manual

50
Control Screen The KONA LH can be controlled by various software applications running on a
host PowerMac as well as act as a Macintosh Desktop extension. The Control
Screen is where you select how the KONA LH directs video and is used by
application software. This screen also provides control for configuring output
timing with regard to external reference video and horizontal/vertical delay.
At the top of the Control screen it will show the current Default KONA LH output
and the application currently controlling the KONA LH card (if there is one). For
example, in the screen shown here, the default output is the Macintosh Desktop and
the only controlling application is the KONA LH Control Panel itself.
KONA LH Control Panel, Control Tab
Control Screen Settings
Default Kona Output—This is where you select what KONA LH will output as a
default when no application has control of the board, such as when the Finder is
active. Since KONA LH can be controlled by software applications as well as its
own control panel, the output can change dynamically. When you select many
video applications, they will grab control of the KONA LH card inputs/
outputs. These settings determine what happens when an application that
doesn’t grab the KONA LH inputs/outputs is active.