Instruction manual

KONA LH/LHe Installation and Operation Manual — Easy Setups for Typical

machine control settings and parameters for the VTR attached. For KONA LH

presets this means the VTR attached at the RS422 port on KONA LH. For non-

KONA LH presets, this means camcorder/VTRs attached directly at the FireWire

port or via some other interface.

If you select a preset you can edit it (click the Edit button) or copy and rename it as

another (click Duplicate). The only exceptions are those presets marked with a lock

icon; those can be duplicated, but when you try to edit one the system will report

they’re locked and can only be copied (it will create the copy when you try to edit).

When editing a Device Control preset you can change the following:

• Name and description of Device Control preset

• Protocol for capture/playback VTR (for KONA LH this will be RS422)

• Audio Mapping

• Time Source (LTC/VITC/both/etc.)

• Port

• Frame Rate

• Default Timecode (Drop Frame etc.)

• Capture/Playback Offsets (to correct for VTR versus Final Cut timing issues)

• Handles/Pre-roll/Post-roll

• Auto Record and PTV

KONA LH ships with VTR Device Control Presets for Sony and Panasonic VTRs.

Select a Device Control Preset for the desired frame rate. Presets for both Sony and

Panasonic VTRs are provided with these frame rates: 23.98, 24, 25, 29.97, and 59.94.

Audio/Video Settings, Device Control Presets Editor Window