User Manual

14
4. Remove the KONA LHe Plus card from its protective anti-static bag; place the card on
top of the bag.
KONA LHe Plus Card
5. Visually locate the PCIe slots inside the Mac chassis. The slots are numbered along
the left side. To determine which slot works best for your Mac Pro model, visit the
AJA website (see “Installation Overview” on page 11 for links). This web-page is
updated regularly to account for Apple product line changes.
Card Slots, PCIe Mac Pro shown here
6. Remove the card edge locking plate on the right side of the card cage, using a
Phillips screwdriver (it is held in place by two captive phillips screws).
7. Carefully insert the KONA LHe Plus card by rocking it slowly into the desired PCIe
slot. Ensure the card edge aligns properly with the Mac Pro’s rear panel opening
(where the card edge locking plate was just removed) and that it is fully seated in the
slot.
8. Replace the card edge locking plate removed earlier, securing the two phillips
screws.
9. Replace the Mac Pro’s access door.
Slot 3 is the preferred slot
on a Mac Pro for KONA LHe Plus
PCIe card installation
PCI-Express Slots