User Manual

KONA LHe Plus Installation & Operation Guide — Installing KONA LHe Plus

Installing KONA LHe Plus Software

First ensure that third-party editing software is installed as detailed in its user documentation.

Next, navigate to the AJA support website for a download of the very latest software for LHe

Plus or use the CD-ROM supplied with your KONA card. The installation package contains the

necessary software drivers and AJA Control Panel. You cannot use KONA LHe Plus with third-

party applications with KONA until the AJA KONA LHe Plus software has been installed on the

host computer.

Since system software updates occasionally become available on our website at:

http://www.aja.com/en/support/downloads/

We recommend checking occasionally for both software updates and additional product

information.

Note: If your computer has previously had another video capture or multimedia card installed,

ensure you remove the card and uninstall any related software before installing KONA LHe

Plus. This will prevent any hardware or software conflicts.

Mac Pro Software

Installation

Procedure

Locate the AJA KONA LHe Plus Software— website download or CD packaged with your system.

Then follow the procedure below. The system must be an Apple Mac Pro (refer to “Installation

Overview” on page 11 for system requirement information).

Mountain Lion OS and Gatekeeper

Note: Before installing KONA 3G software, turn off any virus protection and security software

that you may have installed on your computer. Also, with the addition of Gatekeeper

functionality in Mas OS Mountain Lion, you should go to System Preferences>Security &

Privacy and choose to allow Mac App Store and identified developers.

Mac Security & Privacy Gatekeeper Setting

1. Locate the KONA LHe Plus download package or CD icon on the OS X desktop.