User Manual

30
Updating KONA LHe Plus Firmware
When you update your KONA LHe Plus software by downloading new versions from the
aja.com website, it is possible that some versions may also require a firmware update to
update the software stored in non-volatile memory on the board. Always carefully read the
release notes that accompany each version to be installed. The release notes will spell out all
required software and hardware necessary to ensure a successful update of your KONA LHe
Plus.
Follow these instructions when a firmware update is required:
1. First install the new version of KONA LHe Plus software.
2. After successfully installing the new KONA software, the AJA KONA Updater will
automatically launch. (The updater application is located in the AJA Utilities folder.)
3. When the updater starts, the following screen will display indicating the current
firmware and update firmware creation date.
Firmware Update Welcome Screen
4. Click Update Firmware to begin the update process. Do not interrupt the update
process