User Manual

36
Input/Output Icons—the input and output icons are triangles that together with their
color show all the input and outputs and their status (selected, not selected, input
present or not, format, etc.). A complete video path is shown when inputs and outputs
are connected with lines going to/from the framebuffer.
Input/Output Icon
Conversion Icon—when an input or output is a different standard than the framebuffer
then the KONA LHe Plus may be down-converting the signal to the proper standard.
This may be automatic, because it's detected an input signal that differs from the
standard currently selected, or because you've explicitly told it to convert. In either
case, the block diagram will show the conversion by displaying a conversion icon in
between the input/output and the framebuffer.
Down Conversion Icon
If you click on a conversion icon, the Screen will change to the Format screen, allowing
you to view/edit settings.
Color Meanings—all items in the AJA Control Panel block diagram are color-coded to
show what is happening in realtime. This applies to both icons and text. These colors
have the following corresponding meanings:
Blue: video is same format as the Primary Format (framebuffer)
Red: there is no video, the selected operation cannot be performed, or an invalid
selection has been made
Yellow: reference video (black burst or other reference source)
Green: indicates that LHe Plus is performing some kind of active change to the video, to
make it different from the Primary Format (e.g., down convert).