User Manual

1
41
KONA LHe Plus Installation & Operation Guide — Using The AJA Control Panel
Input Select Screen
AJA Control Panel, Input Select Screen
On the Inputs screen you can view the currently selected video and audio input sources and
map audio sources to the channels supported by your third-party editing application (more on
this later). Two information panes in the screen are provided: Video Input and Audio Input.
Input Screen Settings
Video Input—These pulldown menus allow you to see and change what’s currently
selected for the video (SDI or Analog) and the audio input. If Analog is selected, then you
also need to select the type of Analog input via a pulldown menu. Choices are:
Composite
Y/C
Component (SMPTE/EBU N10)
Component (Beta)
Audio Input—This pulldown menu allows you to pick where the audio comes from. KONA LHe
Plus supports up to 8 channels of embedded digital audio, so you can choose out of the 16
channels that can be embedded in SDI, and pick which to bring in (from the group 1-8 or 9-
16). If your editing application supports two channels of audio, here you can also select
which two channels from the 8 embedded will be mapped to the application’s two
channels.
Setup your
Video and
Audio Input
Sources