User Manual

42
SDI Output Screen The SDI Out screen shows the current settings for the two SDI outputs. If an input/output has
no video, it will be indicated on the block diagram (“No Video”).
AJA Control Panel, SDI Out Screen
SDI Output Screen Settings
Information that can appear includes the following items. You can view the current setting or
use a pulldown menu to select:
Primary—when selected, this indicates that an SDI output (SDI Output 1 or SDI Output 2) is
set to the same format as the framebuffer. That value will be listed in blue.
Secondary—when selected, this indicates that the SDI output is set to a format different from
the framebuffer (Primary Format). That secondary format value will be listed in green.
This shows that active processing of the video is taking place (format change and
possibly down-conversion).