User Manual

KONA LHe Plus Installation and Operation Manual — Audio Output Analog

Audio Output Analog

• 2-channel, 24-bit D/A analog audio, 48kHz sample rate, balanced (via 2 x XLR on breakout

cable or optional KL-Box)

• +24dbu Full Scale Digital (0dbFS)

• +/- 0.2db 20 to 20kHz Frequency Response

• 2-channel unbalanced output (via 2 x RCA jacks on optional KL-Box)

Down-Conversion

• Hardware 10-bit

• Anamorphic: full-screen

• Letterbox: image is reduced with black top and bottom added to image area with the

aspect ratio preserved

• Crop: image is cropped to fit new screen size

• Reference Input

• Analog Color Black (1V) or Composite Sync (2 or 4V)

• Looping

• 75 ohm on optional KL-Box, terminated on supplied breakout cable

Machine Control

• RS-422, Sony 9-pin protocol (via breakout cable or optional K3G-Box)

• 9-pin D-connector pinout is as follows:

1..................GND

2..................RX-

3..................TX+

4..................GND

5..................No Connection

6.................. GND

7.................. RX+

8.................. TX-

9.................. GND

Shell ..........GND