Instruction manual

1
11
KONA LHi Installation & Operation Guide — Cable Connections
Using KLHi-box The KLHi-box attaches to the KONA LHi card via cables that attach to the back of the box. These
cables are supplied with the KLHi-Box. When you purchase the optional box, you get two-
channel unbalanced audio output (2 RCA Jacks)—not available with the standard cable.
AJA KLHi -Box Panel Connectors
About BNC
Connectors
Although most video professionals are used to BNC connectors, you may not have seen them if
you’ve been using primarily desktop video equipment. BNC connectors ensure a positive
connection by the act of locking the connectors together via pins in one connector that fit into
slots in the corresponding connector.
To make a BNC connection, slide the cable connector over the panel connector and then when
seated, rotate the barrel of the cable connector 90° clockwise until the connectors are locked
together. When properly locked, the cable cannot accidentally be pulled out.
Pins (2) on BNC Connector
Align slots in
cable connector
barrel with connector
pins, then slide it over the pins
and rotate the barrel
to lock the connectors
(connector on KLHi-Box)
together