Manual

1
3
AJA RD10MD Dual HD to SD Downconverter User Manual
Introduction
The RD10MD is a 10-bit broadcast-quality Dual channel HD down converter.
Channels 1 and 2 are fully independent. Channel 1 has 2 re-clocked HD/SD-SDI
outputs and channel 2 has 1 re-clocked HD/SD-SDI output. Both Channel 1 and 2
have 2 down converted outputs, which can be independently configured as SDI or
composite analog. All HD formats are supported including 24p/psf with 3:2
pulldown. The SD output can be formatted for either 4:3 or 16:9 monitors. For 4:3
monitors both Letterbox and Crop modes are supported. The RD10MD is dual-rate
(HD/SD) and supports SDI inputs.
The RD10MD is compatible with AJA’s FR1 or FR2 frames.
Features
RD10MD Card Module, Side View
• Dual Independent Channel HD to SD Down Conversion
• Re-clocking HD-SDI/SDI input loop outputs
• Multi-Standard HD-SDI or SDI Input
• SDI and Composite Analog Outputs
• 3/2 Pulldown for 23.98/24 Hz P/PSF inputs
• Full 10-bit Data Path, Multi-point Interpolation
• Configurable for 16:9 or 4:3 Monitors
• Letterbox and Crop Modes
• 4:3 Safe-Zone Graticule
• Pedestal on Composite Analog Outputs