Manual

8
Installation
Typically, RD10MD installation consists of the following:
1. disconnect power from the frame (remove line cord)
2. remove the FR1/FR2 front panel
3. install RD10MD card module
4. apply power to the frame by connecting a north american-style power cord from the
frame to mains power (90 to 260 VAC)
Instructions for removing the frame front door for module installation is discussed in the
FR1/FR2 User Manual.
Specifications
Item Specification
Formats: HD: 1080i 50/59.94/60 Hz
1080p/psf 23.98/24/25/29.97/30 Hz
720p 23.98/24/25/29.97/30/50/60 Hz
Inputs: 2 Channels, HD-SDI or SDI SMPTE 259/292/296, 10-bit, 2x BNC
Outputs: Each Channel has two outputs configurable for either SDI (SMPTE
259M, 10-bit) or analog composite NTSC/PAL, 2x BNC
Channel 1 has two reclocked loop-through outputs, 2x BNC
Channel 2 has one reclocked loop-through output, 1 BNC
Downconversion: Multi-point interpolation, 10-bit processing
3:2 conversion for 23.98/24p/psf inputs
Size: Fits AJA R-Series Frames
Power Consumption: 7 watts