User Manual

Switch on the device, wait until loading, and check the external power status in the
Ajax app. If there is no power, and you are using a terminal adapter, check the
polarity of the connected wires. If there is no power even after reconnecting, please
contact the Support Service.
Maintenance
The device does not require technical maintenance.
Tech specs
Input voltage 8-20 V DC
Output voltage 4.65 V DC ± 3%
Switch on voltage 8 V DC ± 2.5%
Switch off voltage 6.9-7.5 V (depending on load)
Max input current < 1 A
the back lid, turn the device over. The SIM card slot, power, and Ethernet sockets should
match accurately and t the corresponding sockets, and the power button should not
be stuck.Change the information about input voltage on the device body to avoid
incorrect power connections in the future. Use the special bundled sticker with the
instruction.
10. Connect the power (and Ethernet cable) to the appropriate sockets.
11. Switch on the 12 V power source.
Do not connect the power cable with a voltage that exceeds the acceptable input
voltage.
12. Switch on the device by holding the power button for 2 seconds.
13. Close and x the SmartBracket mounting panel.