Owner manual
2
8
4
6
0
10
ON
OFF
CV OUT
CV IN
HOLD
DOWN
UP
GLIDE + NOISE
m
RED
PINK
WHITE
GLIDE
Glide speed 
Glide On/O
Red Noise Output 
White Noise Output 
Pink Noise Output 
Glide Mode 
Hold CV Input
Glide CV Input
Glide CV Output
1 White Noise Out :
This is the White Noise Output and signal level is +/-5 Volts peak to peak. Pure white noise 
is a sound that contains every frequency within the audio range (generally from 20 hertz 
to 20 kHz) in equal amounts. This white noise is generated by using a specially selected 
transistor in avalanche mode and using the exact circuitry from the Model D synthesiser, 
so it is a vintage analogue approximation of pure white noise. 
2 Pink Noise Out :
This is the Pink Noise Output and signal level is +/-5 Volts peak to peak. Pure pink noise is 
white noise that has been ltered to reduce the volume of each increasing octave, which 
compensates for the increase in the number of frequencies per octave. Each octave is 
reduced by 3 decibels, resulting in a noise signature that has equal energy at every 
octave. This pink noise is generated using the same discrete transistor circuitry as the 
vintage Model D synthesiser and is an analogue approximation of pure pink noise.
3 Red Noise Out :
This is the Red Noise Output and signal level is +/-5 Volts peak to peak. Red (or Brownian) 
noise is more heavily ltered than pink noise, at the rate of 6db/octave or more, so that it 
has a much lower high frequency content. It is most commonly used as a random control 
voltage rather than an audio signal.
4 Glide On/O :
This switch turns the Glide eect on/o. It is NOT a bypass switch, its function is the same 
as turning the Glide Speed control fully counter clockwise.
5 Glide CV Input :
This is the Control Voltage (CV) Input to the Glide module. The acceptable input voltage 
range is +/- 10 Volts. However only positive voltages (0 to +6 Volts) are processed, 
negative voltages are ignored and voltages between +6V and +10v are limited to +6v. 
The most common application would be to feed in a 1V/Oct signal from a Midi/CV 
converter, however it’s use is not limited to this and the module can be used for many 
dierent up/down slew eects.
Controls, Inputs and Outputs
1
2
3
4
7
9 
5
6
8




