Owner`s manual

AJP PR4 User’s manual - 3
rd
Edition Page
10
Compression:
To adjust damping force, turn the
button placed on the top of the gas
reservoir (3) clockwise for more
damping force or counter clockwise for
less damping force.
Rebound:
To adjust rebound, turn the screw (4)
clockwise for more rebound speed. To
reduce rebound speed turn counter
clockwise.
Standard Sachs Shock absorber
(PRO Versions) settings:
Spring length:
- Enduro 205mm;
- Supermoto 210mm.
Damping force: turn all to close position
(+) and then turn 20 clicks to open (-).
Rebound: turn all to close position (H)
and then turn 11 clicks to open (S).
! WARNING !
Improper servicing of the rear shock
absorber assembly is dangerous.
The rear shock absorber contains
high-pressured gas and can explode
if improperly serviced.
ENGINE OIL
Recommendation
Use only branded oil for four stroke
engines, to ensure a long engine life.
Use only oils meeting or surpassing the
quality requirements of API classes SF
or SG:
Recommended oil:
ENI / Agip i-Ride moto SAE 20W-50
Specification: API SG JASO MA, MA2.
Checking engine oil level
Engine oil level is checked in a glass
placed in front of rear brake pedal.
Level should be between Min and Max.
If oil level is below Min, oil must be
refilled immediately. If you check that
engine is losing oil (for instance at oil
radiator or oil tubes in 200/240 cc
engines), contact your AJP dealer
immediately.
! CAUTION !
Engine oil level should be checked
everyday or before start any trip. If
necessary, add oil to keep oil level
between H mark and L mark.
3
4
Ma
x
Min