Owner`s manual

AJP PR4 User’s manual - 3
rd
Edition Page
27
These pressure values are indicated for
road use. For an off-road use on
Enduro and EXTREME versions, we
recommend a lower pressure, to assure
traction. In these conditions, we
recommend 1,0 bar (14 psi) in both
tires.
Please consider that these are
indicative values and that correct
pressure depends on the ground where
you drive.
! WARNING !
- Do not mount tires that are not
approved by AJP. Other tires could
have adverse effects on the way
your motorcycle behaves.
- Front and rear wheels may only
be fitted with tires having same
layout. Use homologated tires.
- For your own safety replace
damaged tires immediately.
- Worn tires can have a negative
effect on how your motorcycle
performs, especially on wet
surfaces.
- If air pressure is too low,
abnormal wear and overheating of
tire can result.
SPOKE TIGHTNESS
Checking spoke tension
Correct spoke tension is very important
for the stability of the wheels and thus
for riding safety. A loose spoke causes
the wheel to become unbalanced and
before long other spokes will have
come loose. Check spoke tension,
especially on a new motorcycle, in
regular intervals.
Tight spoke heads and tire fixation (if
exists).
TORQUE:
Spoke head: 3.8 N.m (0,38 Kgf.m)
Tire fixation: 15 N.m (1,5 Kgf.m
If necessary, have the spokes
retightened and the wheel to correct by
an AJP dealer.
! WARNING !
Spokes can tear if you continue to
ride with them loose. This may lead
to an unstable handling of your
motorcycle.
EXHAUST SYSTEM
Maintenance
While cleaning your motorcycle, certify
yourself that no water enters in the
muffler. To avoid that, place a
plug/cover at the muffler’s hole.
Catalysed exhaust
Catalysed exhaust does not require
specific maintenance, only take care
when refuelling.