Owner`s manual

AJP PR4 User’s manual - 3
rd
Edition Page
37
When placing a new lamp, do not touch
the glass body of the lamp so it remains
free from fat.
Note: After installing the lamp on lamp
holder, clean it with a wet alcohol cloth,
to clean any finger print that may origin
hot spots that may reduce lifespan of
headlight lamp.
Engage retaining clip and mount rubber
cap and connector. Reinsert parking
light lamp together with holder and fix
the mask by means of the rubber
bands.
Parking light
Use only 12V5W BA9S lamps
Remove lamp holder away headlight,
press lamp inside, rotate it counter
clockwise and remove it away from
holder.
Install a new lamp on the holder and
put it back on the headlight hole.
Taillight (LED)
Note: rear light is a set of LEDs and
does not allow for replacing, because
they are unchangeable. In the event of
a presence or stop light failure, it is
necessary to replace all the rear spoiler
assembly.
Blinkers lamps
Use only 12V10W BA15S lamps
Blinkers lamp replacement
Remove screw, glass and internal
globe.
1