User Manual

ManualsBrandsAkai Professional ManualsAudio SamplersAkai Professional MPC X – Fully Standalone MPC With 10.1-Inch Multi-Touch Display, 16GB On-Board Storage, 8 Configurable CV/Gate Outputs, Full Control Arsenal and 10GB Sound Library Included

MPC One

Top Panel

23 24

Navigation & Data Entry Controls

1. Touchscreen: This full-color multi-touch display shows information relevant to MPC One’s current operation.

Touch the display (and use the hardware controls) to control the MPC interface. See the previous Touchscreens

section to learn how to use some basic functions.

2. Data Dial: Use this dial to scroll through the available menu options or adjust the parameter values of the

selected field in the display. Pressing the dial also functions as an Enter button.

3. –/+: Press these buttons to increase or decrease the value of the selected field in the display.

4. Undo / Redo: Press this button to undo your last action.

Press and hold Shift and press this button to redo the last action you undid.

5. Shift: Press and hold this button to access some buttons’ secondary functions (indicated by red writing).

Summary of content (4 pages)

PAGE 1
MPC One Top Panel 12 13 1 8 9 7 6 10 15 16 17 18 19 30 14 5 2 3 4 31 20 21 22 23 24 11 25 26 27 28 29 Navigation & Data Entry Controls 1. Touchscreen: This full-color multi-touch display shows information relevant to MPC One’s current operation. Touch the display (and use the hardware controls) to control the MPC interface. See the previous Touchscreens section to learn how to use some basic functions. 2.
PAGE 2
Pad & Q-Link Controls 6. Pads: Use these pads to trigger drum hits or other samples. The pads are velocity-sensitive and pressuresensitive, which makes them very responsive and intuitive to play. The pads will light up different colors, depending on how hard you play them (ranging from yellow at a low velocity to red at the highest velocity). You can also customize their colors. 7. Pad Bank Buttons: Press any of these buttons to access Pad Banks A–D.
PAGE 3
18. Track Mute / Pad Mute: Press this button to view Track Mute Mode where you can easily mute tracks within a sequence or set mute groups for each track. Press and hold Shift and press this button to view Pad Mute Mode where you can easily mute pads within a program or set mute groups for each pad within a program. 19. Next Seq / XYFX: Press this button to view Next Sequence Mode where you can trigger different sequences simply by playing the pads.
PAGE 4
Front Panel 1 2 1. SD Card Slot: Insert a standard SD, SDHC or SDXC card into this slot to access its files directly using MPC One. 2. Phones (1/8” / 3.5 mm): Connect standard 1/8” (3.5 mm) stereo headphones to this output. Rear Panel 9 10 8 7 12 11 13 14 5 4 6 2 1 3 1. Power Input: Use the included power adapter to connect MPC One to a power outlet. 2. Power Adapter Restraint: Secure the power adapter cable to this restraint to prevent it from accidentally unplugging. 3.