Manualshelf

User Manual

ManualsBrandsAkai Professional ManualsAudio SamplersAkai Professional MPC X – Fully Standalone MPC With 10.1-Inch Multi-Touch Display, 16GB On-Board Storage, 8 Configurable CV/Gate Outputs, Full Control Arsenal and 10GB Sound Library Included
81828384858687888990
81
Metronome (Click/Metro)
The Click/Metro window contains all settings regarding the metronome (click track).
To open the metronome settings:
In Main Mode or List Edit Mode: Tap the Metro/metronome icon at the top of the screen.
In the Grid View: Press and hold Shift and tap Click at the bottom of the screen.
In the Track View: Tap Click at the bottom of the screen.
Tap the Metro/metronome icon at the top of the screen.
Use the Count-In field to set if/when the metronome counts before recording.
Off disables the metronome pre-count.
Record enables the pre-count during recording only.
Record + Play enables pre-count in both Record and Playback Modes.
Use the Enable field to set if/when the metronome is enabled.
Off disables the metronome.
Play enables the metronome sound during playback only.
Record enables the metronome sound during recording only.
Record + Play enables the metronome to happen in both Record and Playback Modes.
Use the Rate field to select the metronome click’s time division: 1/4, 1/4T, 1/8, 1/8T, 1/16, 1/16T, 1/32 or 1/32T.
T indicates a triplet-based time division.
Use the Sound field to select the sound that you want to hear for the metronome: Sidestick 1, Sidestick 2, Clap,
Metroclick, Shake, Tambourine, or MPC Click.
Use the Volume knob to set the volume of your metronome click.
Tap the On/Off button to enable or disable the metronome.
Use the Output field to set which pair of outputs will play the metronome click: Out 1,2–7,8 in Standalone Mode, Out
1,2–31
,32 in Controller Mode (MPC Live does not use Out 7,8 in Standalone Mode but displays them to maintain
compatibility with MPC X, which does use them).