Operator's manual AUDIO VIDEO CONTROL RECEIVER AA-V2080 R D S AUDIO VIDEO CONTROL RECEIVER AA-V2080 POWER 1 MASTER VOLUME STANDBY UP SURROUND MODE PHONO STEREO MONO AUTO MANUAL DISPLAY BAND MEMORY PHONES Operator's manual TUNER TAPE 6 CH EXT. IN INPUT MODE BASS TREBLE BALANCE BASS MGT.
1. CAUTION: READ THIS BEFORE OPERATING YOUR UNIT. IMPORTANT SAFETY INSTRUCTIONS READ AND FOLLOW INSTRUCTIONS---All the safety and operation instructions should be read before the product is operated. Follow all operation instructions. 2. RETAIN INSTRUCTIONS---The safety and operation instructions should be retained for future reference. 3. HEED WARNINGS---Comply with all warnings on the product and in the operation instructions. 4. CLEANING---Unplug this product from the wall outlet before cleaning.
technician to restore the product to its normal operation. E. If the product has been dropped or damaged in any way, and F. When the product exhibits a distinct change in performance--- this indicates a need for service. 13. Servicing ---Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
TA B L E OF CONTENT Safety Information Table of Content General Information Panel information Front Panel Back Panel Remote Control Connection Operation Switching on the Receiver Playing the Analog Program Source Playing the Digital Program Source Using the Surround Function Setting Listening to the Radio Other Operation Specification P.1 - P.2 P.3 P.4 P.5 - P.7 P.5 P.6 P.7 P.8 - P.9 P.10 P.10 P.10 P.10 P.11 - P.12 P.13 - P.14 P.15 - P.16 P.16 P.
G E N E R A L I N F O R M ATION A C C E S S O R I ES - Analog audio cables x 2 (with red and white plugs) “2A” size batteries x 2 for the remote control Remote control Instruction Manual AM Loop Antenna REMOTE CONTROL The remote control enables you to activate the main functions of the system. Some buttons are only available on the remote control device. In this case the respective functions can only be activated via the remote control device.
PANEL INFORMATION FRONT PANEL 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 AUDIO VIDEO CONTROL RECEIVER AA-2080 16 17 18 19 20 21 22 23 24 25 26 27 28 1. POWER ON / OFF 2. STANDBY INDICATOR 3. STANDBY 4. PHONO 5. CD 6. TUNER 7. TAPE 8. 6 CH EXT. IN 9. INPUT MODE 10. SURROUND MODE 11. BASS / TREBLE 12. BASS MGT. 13. MASTER VOLUME 14. RESET 15. BALANCE 16. PHONES 17. UP 18. STEREO / MONO 29 30 31 32 33 34 19. MEMORY 20. DISPLAY 21. DOWN 22. BAND 23. STATION 24. AUTO / MANUAL 25. AUX 26. DVD 27.
B AC K P A N E L 1. 2. 3. 4. - 5. 6. 6 CHANNEL EXTERNAL IN Front L & R Center Surround L& R Sub- Woofer 75 OHM JACK FM ANTENNA IN AM LOOP L & R SOCKET ANALOG ADUIO IN Phono Video 1 DVD CD AUX TAPE PLAY TAPE REC (Output) S-V I D E O MONITOR OUT VIDEO 1 IN DVD IN SUBWOOFER OUT 7. COAXIAL IN 8. 9. OPTICAL IN VIDEO MONITOR OUT VIDEO 1 IN DVD IN 10. S P E A K E R S C O N N E C T I O N I N Surround Speakers L & R Center Speaker Front Speakers L & R 11.
REMOT E CONTROL 1 2 3 4 5 6 7 9 11 POWER BASS ON/STANDBY MGT 12 CD DELAY .T 18 DVD SPK SETTING 19 PRO LOGIC VIDEO 1/2 SPK ON/OFF 20 2 CH AUX/ PHONO T. TONE 21 DYNAMIC TUNER LFE 22 CH. TRIM 23 MUTE SURROUND TAPE 13 APS DOLBY DIGITAL 14 MEMORY 15 16 STATION 17 8 10 BAND DOWN AUTO UP STEREO VOLUME 24 25 26 27 28 29 30 31 32 AA-V2080 1. POWER ON / STANDBY 2. MUTE 3. APS 4. MEMORY 5. STATION UP 6. STATION DOWN 7. BAND 8. UP 9. DOWN 10. AUTO SEARCH 11. STEREO 12.
CONNECTION PRECAUTION - Disconnect the power cord from the power socket before any connection. The digital optical connection is less sensitive to external disturbance Loose connect may create noise when operating The single small number in bracket is the key no. on back panel CONNECTION TO AC P O W E R S U P P LY - Connect the power cord to the AC main socket. The receiver is switched on and off by the P O W E R O N / O F F button (Front Panel label 1).
CONNECTION TO SPEAKERS - Connect the cord between speakers to the unit at (Back Panel label 10) the SURROUND SPEAKERS R & L (8 ohm), CENTER SPEAKERS (8 ohm) and FRONT SPEAKERS R & L (8 ohm) sockets on back panel. CONNECTION TO SUBWOOFER - Connect the cord between the subwoofer with built-in amplifier (super woofer) and this unit at SUBWOOFER OUT (Back Panel label 6). *To achieve DOLBY DIGITAL playback effect, use a unit that can sufficiently reproduce frequencies of under 80 Hz.
O PERATION (* The small numbers in bracket is the key no. on panel / remote control information respectively unless specify) SWITCHING ON THE RECEIVER Power On / Off Press P O W E R (Front Panel label 1) to switch the unit on. The STANDBY indicator LED (2) will be lighted. Standby To start operating the unit, press STANDBY (Front Panel label1) or (Remote label 1). The Standby Indicator LED will diminish. When switching on the amplifier, the volume will start at –50 dB.
USING THE SURROUNDING FUNCTION DOLBY SURROUND This unit is equipped with digital signal processing sections for decoding and reproducing movie soundtracks the same way as in movie theaters. Dolby Pro Logic When using conventional video tapes, laser discs, TV programs or CDs with the mark, 3 Dolby Pro Logic extremely natural sound movement and positioning, immersing you in the on screen action.
Relationship between SR-D and DOLBY DIGITAL 35 mm Dolby SR-D film Manufactured under license from Dolby Laboratories.
SETTING TEST TONE It is to adjust playback level from different speakers and is only effective in Dolby Pro Logic and Dolby Digital modes. 1. Press T.TONE (Remote label 28) repeatedly to see L, R, LS, RS, C, and SUB sequentially. 2. Press the VOL UP / DOWN (Remote label 31 and 32) to adjust the sound level of each speaker. 3. The adjustable range is between –10dB and +10dB. * You will hear some noise like sound when adjusting.
Default DRC values: 0/4, 1/4, 2/4, 3/4, 4/4. Level of Compression 0/4 1/4 2/4 3/4 4/4 Increasing Sound Level Decreasing LOW FREQUENCY EFFECT (LFE) It can be adjusted when playing program sources recorded in Dolby Digital. It can only be adjusted under 5.1 channels playback. If the subwoofer clips due to the LFE signal during Dolby Digital playback, adjust the level as needed. 1. Press LFE (Remote label 29). Then press the VOLUME UP / DOWN (Remote label 31 and 32) to adjust. 2.
LISTENING TO THE RADIO Auto. Tuning 1. Select TUNER (Front Panel label 6) as the source. 2. Press BAND (Remote label 7) to choose AM/FM band frequency. 3. Press AUTO/MANUAL (Front Panel 24) or AUTO (Remote label 10) to select to have auto tuning or not. 4. For auto tuning, press UP/DOWN (Front Panel label 17 and 21) or (Remote label 14 and 16) to search for your desired stations automatically. (To operate manual search, press the UP/DOWN buttons the same and searches your favorite station.) PRESET MEMORY 1.
DISPLAY (w/o RDS) Digital (CD, DVD, VIDEO 1 & VIDEO 2) mode---Press this key to display the digital source of the underplaying CD, DVD, VIDEO 1 & VIDEO 2. PS (Station Name) 1. Press DISPLAY (Front Panel 20) until PS appears. 2. The current station name will be shown. CT (Current Time) 1. Press DISPLAY (Front Panel 20), then WAITING CT will appear. 2. The current time will be shown e.g. 14:30. OTHERS OPRERATION MUTE (Remote label 2) In order to stop all the voice, you can press MUTE button.
SPECIFICATION Audio Section Rated Power Output : (EIAJ) FRONT CENTER REAR 80 W + 80 W 80 W 80 W + 80 W Output Terminals : FRONT CENTER REAR 8 ohm 8 ohm 8 ohm Total Harmonic Distortion : less than 0.05% at 1/2 rated power output Line Input (Each Line Input - FRONT SPEAKER OUT) Input Sensitivity/Impedance : Phono (MM): Frequency Response : Tone Control Range : Signal-to-noise Ratio : 150 mV / 47k Ω 2.5 mV / 47 K Ω 20 Hz - 25 kHz +0.
