Operation Manual
7
HOW TO USE BLUETOOTH IN YOUR CAR AUDIO
How to Perform Pairing
Before you can dial out from the car stereo, you must rst perform PAIRING. Pairing is a procedure used to connect 2 Bluetooth
devices together.
1. This unit’s Bluetooth function is always on, perform the pairing starting from your cellular phone. Refer to your cellular manual on
proper pairing.
2. Perform the search for available Bluetooth devices,
“CAR--BT” will show. Enter ‘0000’ when asking for code.
3. After successful pairing, connect to the head unit if it is not automatically connected.
How to call / receive calls using wired remote controller
• When there is incoming call, press
TALK button once to answer.
• During conversation, press
TALK button once to end call.
• To make calls using call history
1. Press and hold
TALK button to display “REDIAL” history.
2. Using VOL knob on main unit, turn repeatedly to select the phone number you want to make call to and
press “ ” to dial out.
Note: Up to 20 phone numbers will be displayed including previous outgoing and incoming calls.
Outgoing calls dialled from remote control will be automatically saved in call history. Calls made directly
on mobile will not be saved.
How to call / receive calls using wireless remote controller
•
To make calls, press “ ” button on the remote controller followed by pressing TEL NO using number keys.
• After entering TEL NO, press “ ” again to dial out.
• During conversation, press “
” button to end call.
• When there is incoming call, press “
” button to receive call.
• Press “
” button to reject incoming calls.
Audio Streaming
1.
If your phone is “A2DP” format is compatible, you can play music in your mobile and the music will be transferred to car audio unit.
2. Make sure your mobile and the car radio unit is paired and connected.
3. Play the music in your mobile according to your mobile operating method.
4. Unit will display “A2DP” when receiving A2DP music automatically, but for some mobile your have to press
LD/MOD button to change
A2DP mode.
5. You can press
or on head unit for previous or next tracks.
TECHNICAL INFORMATION
CD/MP3/WMA PLAYER SECTION
Signal to noise ratio > 60 dB
Channel separation > 50 dB (1kHz)
Frequency response 20Hz - 20 kHz
TUNER (FM)
Frequency range 87.5 -108 MHz
Sensitivity 2.8 µV
Stereo separation 37 dB
Signal to noise ratio >50 dB
Channel step 50 kHz
LINE-OUT
Output 1.5V (max.)
Impedance 10k Ohm
GENERAL
Power supply 12V DC (10.8-15.6V allowable)
Power consumption 10A
Standby power consumption under 10 mA
Speaker impedance 4 or 8 Ohm
Output power 40W x 4CH
Note: Specications and the design are subject to possible modication without notice due to improvement.
TALK BUTTON
MICROPHONE
Disposal of Used Electrical & Electronic Equipment
The meaning of the symbol on the product, its accessory or packaging indicates that this product shall not be treated as
household waste. Please, dispose of this equipment at your applicable collection point for the recycling of electrical & electronic
equipments waste. In the European Union and Other European countries which there are separate collection systems for used
electrical and electronic product. By ensuring the correct disposal of this product, you will help prevent potentially hazardous
to the environment and to human health, which could otherwise be caused by unsuitable waste handling of this product. The
recycling of materials will help conserve natural resources. Please do not therefore dispose of your old electrical and electronic
equipment with your household waste. For more detailed information about recycling of this product, please contact your local
city ofce, your household waste disposal service or the shop where you purchased the product.
For more information and warranty conditions,
please visit :
www.akai.eu