AD100X User Manual (English)
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
8.Clear the panel and case with soft dry cloth only, do not apply any kind of thinner, alcohol or sprays. 9. The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus 10. unplug the apparatus when not using for a long time oriented to disconnect from the Mains power Macrovision: This product incorporates copyright protection technology that is protected by method claims of certain U.
Contents 1. Precautions-----------------------------------------------------------------------------------------4 2. Front Panel and Rear Panel Illustration ------------------------------------------------------------5 3. Remote Control------------------------------------------------------------------------6 4. Connections------------------------------------------------------------------------------------8 5.
1. PRECAUTIONS Before using this unit, be sure to read the applicable items of the operating instructions and these safety suggestions carefully. Afterwards keep them handy for future reference. Take special care to follow the warnings indicated on the unit itself as well as in the operating instructions. Safety Power Source-The unit should be connected to power supply only of the type described in the operating instructions or as marked on the unit. Environment 1.
2. FRONT PANEL AND REAR PANEL ILLUSTRATION Front panel 1. Standby 2. Disc Tray 3. Open/Close 4. Enter 5. Pause 6. Play 7. Stop 8. IR sensor 9. LED Display Rear panel 1. Power Switch 5. Coaxial Audio Output 2. Component Video Output 6. S-Video Output 3. Composit Video Output 7. SCART Output 4.
3. REMOTE CONTROL 1. Power 2. Repeat 3. N/P 4. Subtitle 5. Angle 6. Language 7. Setup 8. Up button 9. Left button 10.Enter button 11.PBC 12.Volume 13.Zoom 14.Return 15.L/R 16.Program 17.Clear 18.PREV 19.Next 20.V-Mode 21.Stop 22.Open/Close 23.A-B 24.Numeric Button 25.Time 26.Title 27.Right Button 28.Menu 29.Down Button 30.Volume + 31.Slow 32.Step 33.Display 34.Mute 35.FWD 36.REV 37.
Using the Remote Control Unless stated other wise, the remote control can operate all the features of the DVD Player, Always point the remote control directly at the remote sensor on the front of the DVD Player, not the TV. Battery Installation Remove the battery compartment lid on the rear of the remote control by sliding the lid down, then off. Place two AAA batteries inside the battery compartment with their + and ends aligned as indicated.
4.CONNECTIONS ● ● Turn off the power before connection. Power switch at the Rear Panel. Turn on the power after finishing connection. Wires must be firmly connected; especially the plug shall be fully inserted.
DVD+ AV Amplifier: Notes : There are the following ways of connecting the player with amplifier: left/right audio output coaxial audio output GB-9
Warning: Do not connect any amplifier with coaxial connector that does not contain Dolby digital AC 3 or DTS decoder. Any attempt to do so and play of DVD disc will result in damaging your speakers and causing possible hearing injury. Other than DVD disc, VCD and CD can be operated normally without conforming to the above restriction.
5. FUNCTION OPERATION 5.1 Function Buttons On the Front Panel These button’s function is the same as the corresponding buttons on the remote control. For the detail information, please see the following texts. 5.2 Function Buttons On the Remote Control POWER Press the button to switch the power between ON and OFF. OPEN/CLOSE To open the disc tray, press OPEN/CLOSE; To close the disc tray, press OPEN/CLOSE again.
DISPLAY Press the button to show the information of the current playing disc. TITLE Press the button to enter the appointed title. (Requires disc support) Direction key(UP/DOWN/RIGHT/LEFT) Press the keys to move the highlighted bar or cursor on any menu to your selection. ENTER Press the button to confirm your choice on screen. REV: During DVD, CD or VCD playback, press REV to scan in reverse. The player will review the disc at different times speed. Press PLAY/PAUSE to resume normal playback.
VOLUME +/Press VOL+ to increase volume and press VOL– to decrease volume. REPEAT Each press of the REPEAT button will change the repeat mode. During VCD,CD playback, there are three modes: repeat Single, repeat All and Off. During DVD, playback, there are three modes: Repeat Chapter, Repeat Title and Off. Note: During VCD playback, the PBC mode must be set to Off A-B During playback, press A-B to select point A, press it again to select point B. The player will repeat the section from A to B automatically.
RETURN When SVCD/VCD disc playing, press RETURN button to the main menu(PBC ON only). PROGRAM The Program Playback option allows entering the order in which the chapters or tracks will be played, up a maximum to 16. Press Program button to display the Program Menu. According to the highlight, move the cursor to the chapters / tracks you want to play, then press ENTER to confirm . Then press Play or use arrow buttons to highlight the “PLAY” item and press Enter.
6. Music CD/MP3/WMA/MPEG4 PLAYING The MP3/WMA/MPEG4 disc has such a directory structure as shown in the right picture. Press Direction key to choose the root directory and then press ENTER button to enter into the sub directory. Press Direction key to choose the desired track and then press ENTER or PLAY to enjoy the music or movie. If you want to return to the upper menu, press Direction key to choose the icon and press ENTER button.
chapter/track, playback jumps to a random chapter/track. As the end of each chapter/track is reached, another random chapter/track will be played until all tracks/chapters have been played or the Shuffle mode is cancelled by toggling to a different "Mode" option. Music Intro: In this mode, the media will play 10 seconds then skip to next media. Edit Mode: To enable programmed playback mode.
7. KODAK PICTURE CD PLAYBACK The KODAK PICTURE CD disc has such a directory structure as shown in the right picture. Press Direction key to choose the root directory and then press ENTER button to enter into the sub directory. Press Direction key to choose the desired picture and then press ENTER or PLAY to enjoy the picture. If you want to return to the upper menu, press Direction key to choose the icon and press ENTER button.
8. SYTSTEM SETUP DVD menu setup Press the SETUP button on the remote control, the SETUP MENU (main) will be displayed. After accessing the setup menu, press the direction buttons for up and down movement to select an item desired, then press the ENTER button to confirm .Press LEFT direction button return to the menu of upper level. To exit the setup, press the SETUP button again. In the SETUP MENU, you may choose any of the following options as you like. 8.
8.2 VIDEO SETUP Select Video in the setup menu, and display the Video submenu: 8.2.1 Aspect Ratio 4:3 : Choosing this setting if your DVD player is connected to a normal ratio TV. You can fill the movie to the entire screen of your TV. This might mean that parts of the picture (the left and right edges) won’t be seen. 16:9 : Choose this setting if your DVD player is connected to a wide screen TV.
RGB: Set the video output to SCART output. If you select SCART connection, you should set up the play mode as RGB state, then it will output normally. 8.3 AUDIO SETUP Select Audio in the setup menu, and display the Audio submenu. 8.3.1 Digital output Selecting the Digital Output setting allows the user to adjust the audio output on S/PDIF ports to work in harmony with the audio equipment (e.g. receiver, speakers) connected to the player. Off: Digital audio output is disabled.
8.4 RATING SETUP Select Rating in the setup menu, and display the Rating submenu: Note: Not all DVDs support ratings. 8.4.1 Parental Control Selecting a Rating allows the user to set the parental control feature of the player Select Parental Control, and press ENTER to change the different mode. Note: Unlock the password before setting Parental Control 8.4.2 Set Password Use the 0-9 keys to input four digits (password), then press ENTER to confirm.
9. Troubleshooting Please read the user s manual carefully before using the DVD player. If you have any troubles in using this player, try to solve the problems by the suggestions mentioned below. If you can not remove the trouble after using all the suggestions, please contact the company or the technical service center authorized by us. For the sake of your safety, please do not open the cover and repair the player by yourself, if that, it may cause electric shock.
REMOTE CONTROL IS INSENSITIVE OR DOES NOT WORK Check the batteries of remote control and make sure that they are to be powerful and good conductivity. Direct the remote control to the IR sensor of the player. Check whether there are some obstacles between the remote control and IR sensor. ABNORMAL FUNCTION OPERATION Turn off the power, and then turn on again.
10. Technical specifications Signal system Frequency Response Power Consumption Signal-to–Noisy Ratio(Audio) Audio Distortion + Noise Audio Output (Analog audio) Video Output Power Supply Dimensions Supported Disc Accessories PAL/AUTO/NTSC 20Hz-20KHz (at 1KHz 0 dB) Power Consumption: 20Watts Power Consumption of Stand-By: 4Watts ≥90 dB (at 1KHz 0 dB) ≤-60dB (at 1KHz0dB) 2.0+0-1..0Vrms Composite: 1.0±0.
11 . Recycling This product bears the selective sorting symbol for waste electrical and electronic equipment (WEEE). Disposal of Used Electrical & Electronic Equipment: The meaning of the symbol on the product, its accessory or packaging indicates that this product shall not be treated as household waste. Please, dispose of this equipment at your applicable collection point for the recycling of electrical & electronic equipments waste.
