Operation Manual

4.CONNECTIONS
●
Turn off the power before connection. Power switch at the Rear Panel.
●
Turn on the power after finishing connection.
Wires must be firmly connected; especially the plug shall be fully inserted.
DVD+TV
Notes :
There are the following ways of connecting the player AV output to the TV set:

S-video cable and left/right audio cable (set the video type to S-VIDEO)

Composite video cable and left/right audio cable

Component video cable and left/right audio cable (set the video type to component, if
you connecting a progressive scan TV set, please set the video type to P-Scan)

Scart cable (press V-MODE button to switch the video mode to and set the video type
to RGB)
yellow
white red
GB-8