Operation Manual

To deselect all tags in the currently shown category, use the Cursor Buttons to select X Category (in the

lower-left corner of the display), and then press the Data Dial.

To deselect all tags, use the Cursor Buttons to select X All (in the lower-left corner of the display), and

then press the Data Dial.

Loading Patches

Browser Mode also lets you load a patch using the Patch

Browser (the right half of the display), which will show all

available patches or multis currently in VIP’s Patch Browser.

To load a patch:

1. Use the Cursor Buttons to select the Patch Browser (the

list of patches in the right half of the display).

2. Turn the Data Dial to scroll through the list.

3. Press the Data Dial to load a patch. The loaded patch will

be highlighted.

Note: The patches shown in the Patch Browser are based

on both the currently selected tags and the text in the

Search field in VIP (above its own Patch Browser). If you

think some patches are missing from the Patch Browser,

make sure that (1) VIP’s Search field is empty and (2) the

correct tags are selected.

Loading Multi Slots

Browser Mode also lets you load different patches to slots in a

multi. When you have selected a multi slot, you can then use

Browser Mode to select a patch and then load it to that multi

slot.

Learn more about how multis work in the Multi Mode chapter.

To load a patch to a multi slot:

1. Use the Cursors to move to the Slot tab in the upper-right

corner (S#). The number indicates the currently selected

slot of the multi.

2. Turn the Data Dial to select the desired slot (S1–S8) and

then press the Data Dial.

3. Use the Data Dial and Cursors to select and load a patch

(described earlier). That patch will then be loaded to the

slot of the multi. Repeat these steps to load patches to

other multi slots.