Operation Manual

29
Selecting Controls
In Control Mode, you can select a control (A) to view its settings or (B) to edit it in Control Edit Mode.
To select a control:
1. Select the type of control by pressing the Control mode
button. Each time you press it, the display will show the
next type of control: encoders, switches, and pads.
2. Use the Page Left/Right buttons to select the desired
bank of that control type. For pads, you can alternatively
use the Pad Bank buttons.
3. To select the desired control, do either of the following:
• Turn the desired encoder or press the desired
switch or pad. (The control will send its MIDI
message when you do this.)
• Use the Cursors to select the desired encoder,
switch, or pad in the display. (Use this option if you
do not want the control to send its MIDI message.)
4. To adjust the value or change the state of a control,
simply turn the encoder or press the switch or pad. You
can do this in Control Mode (or Control Edit Mode) or Main
Mode.
To edit the selected control’s parameters, press the Data
Dial. See Control Edit Mode to learn more about editing
its parameters.
Adjusting Controls
To adjust the value or change the state of a control, simply turn the encoder or press the switch or pad. You
can do this in Control Mode (or Control Edit Mode) or Main Mode.