Operation Manual

43
Multi Edit Mode
Multi Edit Mode lets you edit the various settings of each slot
when using Advance 25 (keyboard range, transposition, MIDI
channel, and mute or solo status).
To navigate this mode:
• Use the Cursors to select the parameter you want to edit.
• Use the Data Dial to change a value or setting.
• Press the Multi mode button or Data Dial to return to the
normal Multi Mode (described earlier).
See the following sections to learn more about using Multi Edit Mode.
Editing Multi Slot Parameters
To edit a multi slot’s parameters:
1. Use the Left/Right Cursors to select the desired multi slot. To move between each view of 4 slots, use
the Page Left/Right buttons.
2. Press the Data Dial. The display will immediately show the control and its parameters.
3. To edit a multi slot’s parameters, use the Cursors to select the desired parameter, and then turn the
Data Dial to change its value or setting. The new value or setting will take effect immediately; you do not
need to confirm your choice or exit Multi Edit Mode.
4. To exit Multi Edit Mode and return to the normal Multi Mode, press the Multi mode button or Data Dial.
Important: You can still make normal Multi Mode adjustments to all 8 slots even while you are in Multi Edit
Mode. Not all of the parameters will be shown in the display, but they are visible in VIP (and when you return
to the normal Multi Mode).