Installation Instructions

15
Installation (Cont.)
After Sales Support
1300 886 649 | [e-mail]
Electrical Connection
• Unscrew the screw and take the control panel cover off the unit.
• Connect the cable to their terminals according to their number.
• Connect the grounded wire as follows:
• Loosen the grounded screw of the electrical shelf.
• Connect the grounded wire with the grounded screw, then set the screw
in the mark.
• Fix the cable to the terminal board with the fastening piece.
• Reinstall the cover with the screw.
Important notes
• Don’t reverse the power polarity.
• Wrong connection will lead to malfunction of some electrical parts.
• Fix the screw nail firmly to the wire, then drag the wire lightly to confirm that
it is fixed firmly. If the wire is loose, fix it firmly. Self-tapping screws cannot
be used for electrical connections.
• If there is a connector, connect it directly.