Getting Started Notifications & Features & Accessories • Automatic programming system Environmental Information This television is designed to consume less energy to help save the environment. To reduce energy consumption, you should take the following steps: You can use the Power Save Mode setting, located in the Picture menu. If you set the Power Save Mode as Eco, the TV will switch to energy-saving mode and the luminance level of TV set will be decreased to the optimum level.
Input Selection Once you have connected external systems to your TV, you can switch to different input sources. Press the Source button on your remote control consecutively to select the different inputs. Changing Channels and Volume You can change the channel and adjust the volume by using the Volume +/- and Programme +/- buttons on the remote. TV Control Switch & Operation Inserting the Batteries into the Remote Lift the cover on the back of the remote gently. Insert two AAA batteries.
Notification Specification TRADEMARK ACKNOWLEDGMENT Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. The terms HDMI and High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. DLNA, the DLNA Logo and DLNA CERTIFIED are trademarks, service marks, or certification marks of the Digital Living Network Alliance.
Getting Started Remote Control - 1 1. Source 2. Launches Netflix Application 3. Internet Portal 4. Play ( in media browser mode ) SOURCE 5. Programme recording 6. Rapid reverse ( in media browser mode ) 7. Mono/Stereo - Dual I-II / Current language (in DVB channels) LANG. 1 2 3 4 5 6 7 8 9 .,/@ 8. Green button 9. Red button 10. Numeric buttons 11. Channel List/TV source 12. Menu 0 13. Volume up / down 14. Back (Return) / Index (in TXT mode) Q.MENU V+ 15. Favourite channel list P+ 16.
Getting Started Connections Connector Type Cables Device Scart Connection (back) VGA Connection (back) SIDE AV PC/YPbPr Audio Connection (side) Side Audio/Video Connection Cable (Supplied) PC Audio Cable (Not supplied) HDMI Connection (back) SPDIFF (Coaxial Out) Connection (back) SIDE AV Side AV (Audio/Video) Connection (side) HEADPHONE Side AV Connection Cable (supplied) If you want to connect a device to the TV, make sure that both the TV and the device are turned off before making any connect
Getting Started First Time Installation - USB Connections (*) LCN is the Logical Channel Number system that organizes available broadcasts in accordance with a recognizable channel sequence (if available). Switching On/Off To Switch the TV On Connect the power cord to a power source such as a wall socket (220-240V AC, 50 Hz). Press Menu button to quit channel list and watch TV.
Recording a Programme IMPORTANT: When using a new USB hard disk drive, it is recommended that you first format the disk using your TV’s “Format Disk” option. To record a programme, you should first connect a USB disk to your TV while the TV is switched off. You should then switch on the TV to enable the recording feature. To use recording your USB drive should have 1 GB free space and be USB 2.0 compatible. If the USB drive is not compatible an error message will be displayed.
Media Browser Menu You can play photo, music and movie files stored on a USB disk by connecting it to your TV. Connect a USB disk to one of the USB inputs located on the side of the TV. Pressing the Menu button while in the Media Browser mode will access the Picture, Sound and Settings menu options. Pressing the Menu button again will exit from this screen. You can set your Media Browser preferences by using the Settings menu.
TV Menu Features and Functions Picture Menu Contents Mode You can change the picture mode to suit your preference or requirements. Picture mode can be set to one of these options: Cinema, Game, Sports, Dynamic and Natural. Contrast Adjusts the light and dark values on the screen. Brightness Adjusts the brightness values on the screen. Sharpness Sets the sharpness value for the objects displayed on the screen. Colour Sets the colour value, adjusting the colors.
Sound Menu Contents Volume Adjusts the volume level. Equalizer Selects the equalizer mode. Custom settings can be made only when in user mode. Balance Adjusts whether the sound comes from the left or right speaker. Headphone Sets headphone volume. Sound Mode You can select a sound mode (If the viewed channel supports). AVL (Automatic Volume Limiting) Function sets the sound to obtain fixed output level between programmes.
Audio Description A norration track will be played for the blind or visually impaired audience. This feature is available only if the broadcaster supports it. Note: Audio description sound feature is not available in recording or time shifting mode. Auto TV Off Sets the desired time for the TV to automatically go into standby mode when not being operated. Standby Search (Optional) Your TV will search for new or missing channels while in standby. Any new found broadcasts will be shown.
General TV Operation Using the Channel List The TV sorts all stored stations in the Channel List. You can edit this channel list, set favourites or set active stations to be listed by using the Channel List options. Configuring Parental Settings To prohibit viewing of certain programmes, channels and menus can be locked by using the parental control system. To display parental lock menu options, the PIN number should be entered. After coding the correct PIN number, parental settings menu will be displayed.
Input sources - can not be selected Software Upgrade Your TV is capable of finding and updating automatically via the broadcast signal. • If you cannot select an input source, it is possible that no device is connected. If not; Software upgrade search via user interface • Check the AV cables and connections if you have tried to connect a device. On the main menu select Settings and then Other Settings. Navigate to Software Upgrade and press OK button.
PC Input Typical Display Modes The following table is an illustration of some of the typical video display modes. Your TV may not support all resolutions.
Supported File Formats for USB Mode Media Extension Format Notes Video .dat, .mpg, .mpeg Mpeg1-2 1080P@30fps, 50Mbit/sec .ts, .trp, .tp, .m2ts MPEG2 , H.264, VC1, AVS, MVC H.264:1080Px2@25fps, 1080P@50fps MVC:1080P@ 24fps Other: 1080P@30fps 50Mbit/sec .vob MPEG2 1080P@30fps 50Mbit/sec .mkv MPEG1-2-4, H.264 H.264:1080Px2@25fps, 1080P@ 50fps, 1080P@30fps, 50Mbit/sec .mp4 MPEG4, XviD, H.264 H.264:1080Px2@25fps, 1080P@ 50fps, 1080P@30fps, 50Mbit/sec .avi MPEG2-4, Xvid, H.264 H.
Supported DVI Resolutions When connecting devices to your TV’s connectors by using DVI converter cable(DVI to HDMI cable - not supplied), you can refer to the following resolution information.
Configuring Wired Device Settings Connectivity Network Type Wired Connectivity To Connect to a Wired Network • You must have a modem/router connected to an active broadband connection. • Ensure that Nero Media Home software is installed to your PC (for DLNA function). See “Nero Media Home Installation” section. • Connect your PC to your modem/router. This can be a wired or wireless connection. • Connect your TV to your modem/router via an ethernet cable.
• The transmission speed differs depending on the distance and number of obstructions between the transmission products, the configuration of these products, the radio wave conditions, the line traffic and the products that you use. The transmission may also be cut off or may get disconnected depending on the radio wave conditions, DECT phones or any other WiFi 11b appliances. The standard values of the transmission speed are the theoretical maximum values for the wireless standards.
Connectivity Troubleshooting Wireless Network Not Available • Ensure that any firewalls of your network allow the TV wireless connection. • Try searching for wireless networks again, using the Network Settings menu screen. If the wireless network does not function properly, try using the wired network in your home. Refer to the “Wired Connectivity” section for more information on the process. If the TV does not function using the wired connection, check the modem (router).
If applications are missing they are listed and must be installed before continuing installation. 5. Click the Install button. The integrated serial will be displayed. Please do not change the displayed serial. 6. Click the Next button. The License Conditions (EULA) screen will be displayed. Please read the license agreement carefully and select the appropriate check box if you agree to the terms of the agreement. Installation is not possible without this agreement. 7. Click the Next button.
Internet Browser To use the internet browser, please select the internet browser logo from the portal section. Refresh Home Page Address Bar Add History Bookmarks Zoom Previous Next Settings Remote control shortcuts (Zoom in-out/Back/Home) Quick Access • To navigate the web browser, use the arrow buttons on the remote control. Press OK to continue. pages and these will take you to the appropriate pages.
Contenu Contenu Consignes de sécurité.................................. 50 Mise en route......................................................... 51 Notifications, Fonctions et Accessoires................. 51 Télécommande - 1................................................ 54 Connexions........................................................... 55 Installation initiale- Connections USB................... 56 Options et fonctions du menu TV.......................... 60 Fonctionnement général de la TV........
Consignes de sécurité Pendant des phénomènes météorologiques extrêmes (tempêtes, foudre) et de longues périodes d'inactivité (aller en vacances), débranchez le téléviseur du secteur. La prise d’alimentation est utilisée pour débrancher le téléviseur de l’alimentation secteur et doit donc rester facilement opérable. ATTENTION RISQUE D'ÉLECTROCUTION NE PAS OUVRIR ATTENTION : POUR ÉVITER TOUT RISQUE D’ÉLECTROCUTION, NE RETIREZ PAS LE COUVERCLE (OU L'ARRIÈRE).
Mise en route Notifications, Fonctions et Accessoires • Prise péritel pour appareils externes (appareil vidéo, jeu vidéo, appareil audio, etc.) Informations sur l'environnement Ce téléviseur est conçu pour consommer moins d'énergie aux fins écologiques. Pour réduire effectivement votre consommation électrique, vous devez suivre les étapes ci-après: Vous pouvez utiliser le Mode Économie d'énergie, du menu Image.
Commutateur de commande et fonctionnement de la TV Sélection d'entrée Une fois que vous avez connecté des systèmes externes à votre téléviseur, vous pouvez passer à différentes sources d'entrée. Appuyez sur la touche Source de votre télécommande pour sélectionner successivement les différentes entrées. Changer les chaînes et régler le volume Vous pouvez changer de chaîne et régler le volume à l'aide des touches Volume +/- et Programme +/- de la télécommande.
Notification RECONNAISSANCE DE MARQUE COMMERCIALE Spécifications Diffusion TV PAL SECAM BG/I/DK/LL’ Réception des chaînes VHF (BAND I/III) - UHF (BAND U) - HYPERBAND Réception numérique TV avec antenne-câble numérique entièrement intégré (DVB-T-C) Nombre de chaînes prédéfinies 1000 Indicateur de chaîne Affichage à l'écran Entrée d'antenne RF 75 Ohm (déséquilibrée) Tension de fonctionnement 220-240 V AC, 50Hz. Audio Allemand+Nicam Stéréo Puissance de sortie audio (WRMS.
Mise en route Télécommande - 1 1. Source 2. Lance l'application Netflix 3. Portail Internet SOURCE 4. Lecture (en mode du Navigateur média) 5. Enregistrement de programme 6. Retour rapide (en mode du Navigateur média) LANG. 1 2 3 7. Mono/Stéréo - Dual I-II / Langue en cours (dans les chaînes DVB) 4 5 6 8. Bouton vert 7 8 9 9. Bouton rouge .,/@ 0 11. Liste de chaînes/TV source Q.MENU V+ P+ PEXIT BACK 12. Menu 13. Volume haut/bas 14.
Mise en route Connexions Connecteur Type Câbles Dispositif Péritel Connexion (derrière) VGA Connexion (derrière) AV LATÉRAL PC/YPbPr Audio Connexion (latéral) Câble de Connexion Latérale Audio/Vidéo (fourni) Câble audio du PC (Non fourni) HDMI Connexion (derrière) SPDIFF (Sortie coaxiale) Connexion (derrière) AV LATÉRAL AV latéral (Audio/ Vidéo) Connexion (latéral) CASQUE Câble de connexion latérale AV (fourni) Connexion de casque (latéral) YPbPr Vidéo YPBPR Si vous souhaitez connecter un appa
