User manual

6
i
This appliance is equipped with rubber feet to prevent it from
moving. The feet are made from non-migrating material specially
formulated to avoid leaving any marks or stains on furniture.
However, certain types of furniture polishes, wood preservatives or
cleaning sprays cause the rubber to soften and leave marks or a
residue on the furniture, and potentially risk the surface to become
damaged.
To prevent damage to wooden surfaces, we recommend that you
apply self-adhesive pads to the bottom of the rubber feet before
installation.
Mounting the foot3.1
● Put the foot on a horizontal at surface.
● Hold the appliance over the foot. Lower the appliance steadily until it ts in
the mounting socket.
● Insert the screws into the holes. Tighten the screws securely.
● Put the appliance on a horizontal at surface.
Wall mounting3.2
The appliance can be attached to wall brackets complying with VESA
standard. For this purpose, screw holes have been provided in the back.
● Mount the wall bracket to a wall. Refer to the mounting instructions
supplied with the wall bracket.
● Remove the stand from the appliance.
● Hold the appliance in front of the wall bracket. Align the screw holes with
the holes in the socket.
● Insert the screws into the holes. Tighten the screws securely.