9” Portable DVD player ACVDS935T ALD1915H User manual Gebruiksaanwijzing Manuel de l’utilisateur Manual de instrucciones Gebrauchsanleitung Οδηγίες χρήσεως Brugsanvisning Downloaded From Disc-Player.
Table of contents 1. 2. 3. 4. 5. 6. 7. 8. 9. Safety............................................................................ 3 1.1 1.2 1.3 Intended use.....................................................................3 Labels in this manual........................................................3 General safety instructions...............................................4 2.1 2.2 Unpacking.........................................................................4 Package contents...............
ACVDS935T 1. Safety 1.1 Intended use The LCD display with built-in DVD player plays film and photos from DVD, USB and memory card. The game pad can be connected to play video games. The appliance also plays music from CD. Read the manual carefully before the first use. 2 DVDs and DVD appliances are manufactured under the worldwide agreed DVD regional code system that the appliance will operate only with corresponding disc of the same regional code.
1.3 General safety instructions ! WARNING Do not put force on the appliance. The appliance can fall and can cause serious injury. ! CAUTION Do not spill any liquid on the appliance. ! WARNING Do not insert any objects in the ventilation holes. ! CAUTION Do not block the ventilation holes. i This appliance is double insulated; therefore no earth wire is required. Always check that the mains voltage corresponds to the voltage on the rating plate.
ACVDS935T 2.2 Package contents The following items are included in the received package: 1 LCD display with built-in DVD player (master unit) 1 LCD display (slave unit) 2 In-ear headphones 1 Unit connection cable 1 Game pad 1 Remote control 1 Battery (CR2025) 1 Support strap 1 Carrying bag 1 Operator manual i If any item is missing, please contact your reseller. 3. Installation ● Install the batteries in the remote control. Read the paragraph "Remote control".
3.1 Connecting the units ● Connect the adaptor plugs of the connection cable to the DC OUT 9-12 V connection and to the AV OUT connection in the master unit. ● Connect the other ends of the connection cable to the DC IN 9-12 V connection and to the AV IN connection in the slave unit. 3.2 Support strap ● Secure the rear of the unit to the support strap. 6 Downloaded From Disc-Player.
ACVDS935T 3.3 Connecting to a power source Connecting to a car battery For this connection the 12 VDC adaptor + cable has to be used. ● Connect the adaptor plug of the adaptor cable to the DC IN 9-12 V connection in the master unit. ● Connect the DC plug to 12 VDC receptacle of the vehicle. Connecting to the mains For this connection the AC/DC adaptor + cable has to be used. The AC/DC adaptor + cable is not supplied with the appliance.
3.5 Remote control Installing the batteries ● Press the catch and at the same time pull out the battery tray. ● Insert 1 lithium battery, type CR2025 3V battery with the stamped (+) mark facing upward. ● Insert the battery tray into the remote control. 8 Downloaded From Disc-Player.
ACVDS935T 4. Functions 4.1 Master unit 2 3 4 5 6 7 8 9 1 2 3 4 5 6 7 8 9 10 10 11 12 13 14 15 16 OPEN button SD/MS/MMC card slot USB slot COAXIAL output Headphone jack AV OUT connection DC OUT 9-12 V connection DC IN 9-12 V connection Master power switch SOURCE button Downloaded From Disc-Player.
4.2 Slave unit 20 21 25 22 23 24 20 21 22 23 24 25 MODE button MUTE button VOL - button VOL + button LCD display ENTER button 4.3 31 32 33 34 35 36 37 38 39 40 10 26 26 27 28 29 30 27 28 29 30 Arrow buttons Headphone jack AV IN connection DC IN 9-12 V connection Master power switch Game pad Joystick Direct pad SELECT button Power switch START button A button B button X button Y button RESET button Downloaded From Disc-Player.
ACVDS935T 4.
5. Operation All functions of the unit are accessible using the remote control. All instructions refer to operation with the remote control, unless indicated otherwise. 5.1 Master power switch The units are equipped with a master power switch (9 & 30) located at the side panel. ● Set the switch into the ON position prior to taking the units into operation. ● Set the switch into the OFF position prior to disconnecting from the mains. i ● The units are designed to be operated using the remote control.
ACVDS935T DVD/CD functions ● Switch on the units. Select the DVD mode. ● To insert a disc: • Press the OPEN button (1) to open the disc compartment. • Insert the disc with the label upwards. • Close the disc compartment. The display shows the total number of tracks on the CD. ● To start playback, press the PLAY/PAUSE button (62) once. ● For extended instructions, read the paragraph "DVD/CD functions" further on in this manual. USB functions ● Switch on the master unit.
5.3 DVD/CD functions After the disc has been loaded, the disc starts automatically ● Press the arrow buttons (47) to select a menu item for DVDs. ● Press the ENTER button (48) to enter the selected menu item. During playback, the following functions are available: ● To select a chapter (DVD) or track (CD), press the digit buttons (43). ● To select the next or previous chapter (DVD) or track (CD), press the PREV button (56) or the NEXT button (57).
ACVDS935T i ● Normally, if an MP3 disc is loaded, the unit will take longer time to read the initial data. ● A DVD that does not match the region code cannot be read by the unit. ● If a disc contains mixed content (e.g. MP3 and video files), the unit will only recognise, list and play one content type. ● The screen saver becomes active if no disc has been loaded for 3 minutes, or if the unit has been in STOP mode for 3 minutes.
Using the ZOOM function This function can be used for zooming in and out on photos and DVDs. The available zoom ratios are: 2x, 3x, 4x, 1/2x, 1/3x, 1/4x. ● Press the ZOOM button (53). ● Press the ZOOM button again to set the correct size. ● Press the arrow buttons to move through the picture. Using the MP3/WMA/MPEG4 playback function ● Insert an MP3/WMA/MPEG4 disc. A content menu will display on the TV screen. ● Press the up/down arrow buttons (47) to select a folder or a file.
ACVDS935T 5.4 Game functions After having connected the game pad, a menu screen appears on the display. ● Select a game from the menu. Scroll up or down with the joystick (31). ● Press the START button (35) to confirm. ● If you want to change game, press the RESET button (40) and select a new game from the menu. ● When you are finished, slide the power switch (34) to the OFF position and disconnect the RCA cable. 5.5 DVD setup menu operation i This menu only works in DVD mode.
Audio setup page Downmix ● Select LT/RT to mix 5.1-channel audio into left channel and right channel. ● Select STEREO to mix 5.1 channel audio into signal stereo. i This function is only available for Dolby AC-3 encoded 5.1-channel discs. Digital output ● Select SPDIF OFF to switch off the digital audio signal output. ● Select SPDIF RAW to set the digital audio signal output to its raw format (DTS/Dolby Digital 5.1). ● Select SPDIF PCM to set the digital audio signal output to PCM format.
ACVDS935T ● TV TYPE to set the colour system. The following settings are available: PAL, AUTO, NTSC. ● AUDIO to set the audio language. ● SUBTITLE to set the subtitle language. ● DISC MENU to set the language for the disc menu. ● PARENTAL to set a rating for movies played by the unit. Movies rated higher than the level set for the parental lock can not be viewed. This function is only available with discs that have parental rating encoded. ● MP4 SUBTITLE to set the subtitle language for MP4 files.
6. Cleaning and maintenance ! WARNING Before performing any cleaning or maintenance, switch off and unplug the appliance. ● Clean the outside of the appliance with a soft cloth. When the appliance is very dirty, dampen the cloth slightly with water and a neutral solution. 6.1 Handle and care of a disc ● Hold the disc with fingers. Hold the disc outer edge and/or the centre spindle hole. Do not touch the disc surface. ● Do not bend or press the disc.
ACVDS935T 7. Troubleshooting Trouble No sound or incomplete audio No power Malfunction DVD/VCD/CD Trouble No playback No sound or incomplete audio No scan or skip possible Downloaded From Disc-Player.com Akai Manuals Action Check if the random equipment are switched on correctly. Check cables for connection problems. Check if the correct source is selected. Check volume or mute setting. Check if the power cord has been properly connected to the power outlet.
Picture distorted or noisy Picture not full screen MP3 playback Trouble No sound or incomplete audio USB playback Trouble No playback Disc may be damaged or dirty, clean the disc or try another disc. Check TV system setting (PAL/NTSC). Clean the disc. Select the screen format from the unit's setup menu. Select screen format in disc start menu. Action If MP3 data is mixed with other files on CD, the appliance may play the non-MP3 files as noise or without sound or it rejects the disc.
ACVDS935T 8. Technical data DVD player Parameter Value Voltage 9-12 VDC Input voltage 100 ~ 240 VAC / 50 ~ 60 Hz Power consumption < 18 W Max. power output 2 x 1.5 W USB connection USB 2.0 compatible Flash memory connection SD/MS/MMC Dimensions (W x H x D) 260 x 182 x 37.
Remote control Parameter Power consumption Battery size Value 2x 1.5 V CR2025 Supported media formats Parameter Disc types Picture formats Video formats Audio formats Working environment Parameter Operating temperature Relative humidity 24 Downloaded From Disc-Player.
ACVDS935T 9. Disposal of used electrical and electronic equipment Z The meaning of the symbol on the material, its accessory or packaging indicates that this product shall not be treated as household waste. Please, dispose of this equipment at your applicable collection point for the recycling of electrical and electronic equipments waste. In the European Union and Other European countries which there are separate collection systems for used electrical and electronic product.
