ALED 1605TBK/TWE, 1905TBK/TWE, 2205TBK/TWE, 2405TBK/TWE, 2605TBK/TWE, 3205TBK/TWE User manual 1
Contents Features.........................................................................1 Managing Stations: Favorites......................................... 14 Introduction ....................................................................1 Button Functions............................................................ 14 Preparation ....................................................................1 Managing Stations: Sorting Channel List........................ 14 Safety Precautions ..........
Features Introduction • Remote controlled colour LCD TV. Please read the corresponding instructions of this • Fully integrated Terrestrial digital video and handbook prior to the first usage of the device, even audio. this connection is also designed to when the usage of electronic devices is familiar to accept high definition signals. you. Notice especially the chapter SAFETY • USB input PRECAUTIONS. carefully keep the handbook as • 1000 programmes (analogue+digital). future reference.
Safety Precautions Heat and Flames Read the following recommended safety The set should not be placed near to open precautions carefully for your safety. flames and sources of intense heat such as an electric heater. Ensure that no open Power flame sources, such as lighted candles, • Always use the provided AC adaptor. are placed on top of the TV. Batteries should not be • Operate only from the power source specified on the exposed to excessive heat such as sunshine, fire or the AC adaptor.
The Standby Off/On button doesn´t separate this device Headphone Volume completely from mains. Moreover the device consumes Excessive sound pressure from earphones power in the standby operation. In order to separate the and headphones can cause hearing loss. device completely from mains, the mains plug has to be Installation pulled from the mains socket.
Package Contents Environmental Information • This television is designed to consume less energy to save environment. You not only help to save the environment but also you can save money by reducing electricity bills thanks to the energy efficiency feauture of this TV. To reduce energy consumption, you should take the following steps: • You can Power Save Mode setting, located in the Feature menu.
Remote Control Buttons 1. Standby 2. Image size/ Expand (in TXT mode) 3. Sleep timer 4. Numeric buttons 5. Return/ Exit (in DTV mode)/ Index page (in TXT mode) 6. Cursor up/ Page up (in TXT mode) 7. Cursor left 8. Programme up (Page down in DTV mode) 9. Programme down (Page up in DTV mode) 10. Mono-Stereo / Dual I-II / Current language 11. Previous Programme/ Swap 12. Electronic programme guide 13. Info/ Reveal (in TXT mode) 14. Picture mode selection 15. Source selection 16.
1. HDMI 1: HDMI Input HDMI Inputs are for connecting a device that has an HDMI socket. Your LCD TV is capavle of displaying High Definition picture from devices such as a High Definition Satellite Receiver or DVD Player. These devices must be connected via the HDMI sockets or Component Socket. These sockets can accept either 720p or 1080p (Optional) signals. No sound connection is needed for an HDMI to HDMI connection. 2. RF Input connects to an aerial antenna system.
Use an SPDIF coaxial cable to trasfer audio signals to a device that has S/PDIF input 6. DC 12 V Input is used for connecting the supplied power adaptor. Viewing the Connections – Side Connectors 1. CI Slot is used for inserting a CI card. A CI card allows you to view all the channels that you subscribe to. For more information, see “Conditional Access” section. 2. Side USB input. 3. TV control buttons. 4. Side audio-video connection input is used for connecting video and audio signals of external devices.
reguirements. Resolution information can be found in the Using Digital Multimedia Connectors • appendix parts. You can connect USB devices to your TV by using the USB input of the TV. This feature allows you to display/ play JPG, MP3 and video files stored in a USB stick. • It is possible that certain types of USB devices ( e.g. MP3 Players) may not be compatible with this TV. • You may back up your files before making any connections to the TV set in order to avoid any possible data loss.
• Connecting to a DVD Player via Note: These three methods of connection perform the same function but in different levels of quality. It is not necessary to Component Sockets (YPbPr) or Scart connect by all three methods. Cable • Some DVD players are connected through COMPONENT Remote Control Handset SOCKETS (YPbPr). YPbPr can be used only when you connect Inserting Batteries a device that has a YPbPr to PC cable (YPbPr cable is not supplied). • • “Input selection” section.
Input Selection Volume Setting Once you have connected external systems to your TV, you can • switch to different input sources. Press “SOURCE” button on Press “V+” buttons to increase the volume. Press “V-“ button to decrease the volume. A volume level scale your remote control consecutively for directly changing sources. (slider) will be displayed on the screen. Program Selection (Previous or Next Program) • Press “P-“ button to select the previous program.
Blue button (Filter): Views filtering options. First Time Installation IMPORTANT: Ensure that the aerial is connected before switching on the TV for the first time installation. • When the TV is operated for the first time, installation wizard will guide you through the process. First, language selection screen will be displayed: Red button (Prev Time Slice): Displays the programs of previous time slice. Green button (Next Time Slice): Displays the programs of the next time slice.
Installation Press “MENU” button on the remote control and select Installation by using button. Press OK button and the following menu screen will be displayed. To select the “Yes” or “No” option, highlight the item by using buttons and press OK button. Afterwards, the following OSD will be displayed on the screen and the digital television will search for digital terrestrial TV broadcasts. Select Automatic Channel Scan (Retune) by using button and press OK button.
Digital Manual Search Press OK to cancel. Select Yes by pressing button and press OK to delete all of the channels. Managing Stations: Channel List In manual channel scan, the number of the multiplex or frequency are entered manually and only that multiplex or The TV sort all stored stations in the Channel List. You can edit frequency are searched for the channels.
• stored channel on that number, a warning screen will be Managing Stations: Favourites displayed. Select Yes if you want to move the channel and You can create a list of favourite programs. press OK. • • Press OK button to process. Selected channel is now List item by using moved. button. Press OK to view menu contents. Deleting a Channel • Select Favourites to manage favourite list. Use and OK buttons to select Favourites.
ON-Screen Information You can press “INFO” button to display on-screen information. Details of the station and current program will be displayed on the information banner. The information banner gives information on the channel selected and the programs on it. The name of the channel is When you select Videos from the main options, available video displayed, along with its channel list number. Hint: Not all files will be filtered and listed on this screen.
INFO: Displays help screen. Viewing Photos via USB When you select Photos from the main options, available image Viewing Music via USB files will be filtered and listed on this screen. When you select Music from the main options, available audio files will be filtered and listed on this screen. Jump (Numeric buttons): Jump to selected file using the numeric buttons. 0..9 (Numeric buttons): The TV will jump to the file starting OK: Views the selected picture in full screen.
View Style: Sets default browsing mode. Slide Show Interval: Sets slide show interval time. Show Subtitle: Sets subtitle enabling preference. Subtitle Language: Sets supported subtitle language. Subtitle Position: Sets subtitle position as up or down. Subtitle Front Size: Sets subtitle front size (max. 54pt). Changing Image Size: Picture Formats • You can change the aspect ratio (image size) of the TV for viewing the picture in different zoom modes.
Contrast: Sets the lightness and darkness values of the screen. Brightness: Setts the brightness values for the screen. Sharpness: Sets the sharpness value for the objects displayed on the screen. Color: Sets the color value, adjusting the colors. Color Shift: Adjust the desired color tone. Color Temp: Sets the desired color tone. Setting Cool option gives white colors a slight blue stress. The top and bottom of the picture are slightly cut off. For normal colors, select Normal option.
Equalizer: Press OK button to view equalizer submenu. Autoposition: Automatically optimizes the display. Press OK to optimize. H Position: This item shifts the image horizontally to right hand side or left hand side of the screen. V Position: This item shift the image vertically towards the top or bottom of the screen In equalizer menu, the preset can be changed to Music, Movie, Dot Clock: Dot Clock adjustments correct the interference that Speech, Flat, Classic and User.
Operating Settings Menu Items Configuring Language Preferences • Press You can operate the TV´s language settings using this menu. • Press OK button to select an item. • Press “MENU” button to exit. button to highlight a menu item. Press “MENU” button and select the fifth icon by using button. Press OK button to view Settings menu. Use Settings Menu Items button to highlight Language and press OK to continue: Conditional Access: Controls conditional access modules when available.
Language Settings Parental Settings Menu Operation • Select an item by using • Use • Press OK button to view more options. button. button to set an item. Menu Lock: Menu lock setting enables or disables the menu access. You can disable access to the installation menu or the In the configuration menu, highlight the Language Settings item whole menu system. by pressing Maturity Lock (optional): When set, this option gets the buttons.
Setting Program Timers Configuring Date/ Time Settings You can set program timers for a particular program using this Select Date/Time in the Settings menu to configure Date/Time feature. settings. Press OK button. Press button to set timers on an event. Program timer function buttons will be displayed on the screen. Adding a Timer • Press YELLOW button on the remote control to add a timer.
proper operation, please ensure that the TV is set to standby mode. • Select Sources in the Settings menu and press OK button. • Press • Use buttons to select a source. button to enable or disable the selected source. Changes ate automatically stores. Note: YPbPr mode can be used only when you connect a device You can enable or disable automatic upgrade by setting that had a YPbPr output through the PC input with YPbPr to PC Automatic Scanning option. cable (not supplied).
Other Features is present. Pressing Displaying TV Information: Program Number, Program Name, commands will request the next or previous page respectively. Sound Indicator, time,. teletext, channel type and resolution Tips information is displayed on the screen when a new program is Screen Care: Clean the screen with a slightly damp, soft cloth. entered or “INFO” button is pressed. Do not use abrasive solvents as they may damage the coating Mute function: Press button to display sound.
Appendix A: PC Input Typical Display Modes The display has a maximum resolution of 1360 x 768. The following table is an illustration of some of the typical video display modes. Your TV may not support different resolutions. Supported resolution modes are listed below. If you switch your PC to an unsupported mode a warning OSD will appear on the screen. (X: Not Available, O: Available) In some cases a signal on the LCD TV may not be displayed properly.
Appendix C: Supported DVI Resolutions When connecting devices to your TV´s connectors by using DVI converter cables (not supplied), you can refer to the following resolution information.
Appendix E: Software Upgrade • Your TV is capable of finding and updating new software upgrades over broadcast channels. • For broadcast channels search, TV looks the available channels stored in your settings. So before software upgrade search, it is advised to auto search and update all available channels. 1) Software upgrades search via user interface • It is possible manually to check if there is a new software upgrade for your TV set. • Simply navigate on your main menu.
Specifications TV BROADCASTING PAL/ SECAM B/G D/K K´ I/I´ L/L´ RECEIVING CHANNELS VHF (BAND l/lll) UHF (BAND U) HYPERBAND NUMBER OF PRESET CHANNELS 1000 CHANNEL INDICATOR On Screen Display RF AERIAL INPUT 75 Ohm (unbalanced) OPERATING VOLTAGE 110-240V AC, 50/60 Hz. AUDIO German + Nicam Stereo AUDIO OUTPUT POWET (W 2 x 2,5 ) (10% THD) RMS.
MOBIL TV INSTRUCTIONAL MANUAL Switching the TV On Using 12 Volt 1. Connect the cigarette lighter plug cable to the cigarette lighter socket of your car or a cable with clips to the battery of car, making sure to observe the correct polarity. 2. Plug the other side of 12 volt cable to DC 12 socket at the back of the TV. Then the standby LED lights up. 3. Press the button, P+/ P- or a numeric button on the remote control or press the button, - or + button on the TV. The TV will then switch on. 4.
Contents Features................................................................................... 32 Features General Properties................................................................32 Safety Information ...................................................................33 General Properties Notes on Discs .........................................................................33 • On handling discs..................................................................
Safety Information CAUTION On cleaning DVD Player is a class 1 laser product. However this • product uses a visible beam which could cause hazardous Before playing, clean the disc with a cleaning cloth. Wipe the disc from center out. radiation exposure. Be sure to operate the player correctly as instructed.
DVD Control Panel Buttons A. Disc loader B. Play/ Pause Plays/ pauses the disc. When DVD menu (root menu) is active, this button function as “button select” (selects the highlighted item in menu) if this is not prohibited by the disc. C.Stop / Eject Stop playing disc/ Eject or load the disc Note: • You cannot eject the disc via the remote control. • While playing a file, you should press STOP button three timer to eject. Overview of the Remote Control 1. Standby 2. Numeric buttons 3.
General Operation You can operate DVD, movie CD, music or picture CD´s content by using the proper buttons on your remote control. Below are main functions of commonly used remote control buttons. (*) You can switch to title by pressing numeric keys directly. You need to press 0 and then digit key to switch one digit titles (example: to select 5, press 0 and 5.
11. Reverse stepping is not available. General Playback 12. For your convenience: Basic Play If you attempt to enter a number greater than the total time of the 1. Press on the power button 2. Please insert a disc to the loader. current title, the time search box disappears and Input Invalid” message appears on up-left corner of screen. The disc will be automatically loaded and play commences if the 13. Slide Show is disabled when the ZOOM mode is on.
SPDIF OUTPUT Preferences You can set Spdif Output as PCM or RAW. If you select PCM DEFAULT from SPDIF Output in DVD menu and play DVD with Dolby If you choose RESET and press SELECT, the factory-presets are audio, you can get audio autput with two channels via the loaded. Parental level and parental password does not change. speakers and the SPDIF Out.
Some functions (Angle, Zoom etc) do not work signals. Incorporating a new video compression technology • These functions are not available on the DVD. (MPEG ll) and high-density recording technology. DVD enables • Angle can only be changed when the angle symbol is aesthetically pleasing full-motion video to be recorded over long periods of time (for instance, a whole movie can be recorded). displayed. DVD has a structure consisting of two 0.
Note: It is not guaranteed that all DivX formats are supported.
