MANUAL DE UTILIZARE MICROSISTEM: RADIO/PLAYER CD cu USB si Cititor de CARD 1.SIGURANTA 1.1 Intentionati sa folositi Microsistemul DVD reda muzica de pe CD si muzica,video si fotografii de pe DVD si USB.Aparatul poate reda fotografii de pe CD inregistrate in system Kodak. Cititi manualul cu atentie.
- - - DVD urile si playerele DVD sunt fabricate conform intelegerilor internationale de cod regional.Ca atare aparatul va reda numai discurile cu codul regional pentru care a fost fabricat. Daca codul de pe eticheta aparatului nu corespunde cu codul de pe disc acesta nu poate fi redat. Aparatul a fost construit in tehnologia protectiei copierii pentru a preveni copierea discului pe oricare media.
2.Difuzoare 2.Perechi de fire pentru difuzoare 1.Telecomanda 2.Baterii (AAA) 1.Cablu RCA 1.Manual de utilizare. 3.Instalare * Asezati aparatul pe o suprafata neteda orizontala *Conectati difuzoarele la aparat.Cititi paragraful “Instalarea difuzoarelor” *Conectati aparatele exterioare.Cititi paragraful “Conectarea echipamentelor externe” *Conectati aparatul la retea. * Instalati bateriile in Telecomanda.
Conectarea la difuzoare Apasati lamela pentru a deschide mufa.Tineti apasat . Conectati capetele firelor la difuzoare imperechind polaritatile – si + Eliberati lamele pentru a bloca firele. Conectarea la aparat. Apasati lamlele pentru a deschide mufa. Conectati capatele firelor difuzoarelor la aparat imperechind polaritatile – si +. Eliberati lamelele pentru a bloca firele. Conectarea echipamentelor externe. Aparatul include diferite optiuni de conectare a echipamentelor.
Aparatul are urmatoarele iesiri video (in ordinea preferintelor) Componenta: Conectati un cablu corespunzator Pr/Y/Pb la mufele COMPONENT VIDEO OUT. SCART: Introduceti un cablu corespunzator la mufa SCART OUT. S-Video: Introduceti un cablu corespunzator la mufa S-VIDEO OUTPUT. Video compus: Introduceti un cablu corespunzator la mufa VIDEO OUTPUT. NOTA: Nu conectati simultan toate iesirile ,vor afecta calitatea semnalului. Conectarea cablului.
Panoul Frontal 1. Butonul Standby 2. Afisajul 3. Locas Disc 4. Senzor Telecomanda 5. Jack Casca 6. Slot USB 7. Slot Card Memorie 8. Protectie pentru mufele conecatre echipamente externe 9. Butonul Melodi/Capitol Anterior 10. Butonul Melodie/Capitol Urmator 11. Butonul Volum 12. Butonul Play/Pauza 13. Butonul Dechide/Inchide Panoul Spate 14.Butonul de retea. 4.
35 36 37 38 39 40 41 42 43 44 45 46 47 Butonul STEP Butonul A-B REPEAT Butonul REPEAT Butonul STOP Butonul ZOOM Butonul MENU Butonul SUBTITLE/AUTO Butonul PREV Butonul NEXT Butonul Afisaj pe Ecran(OSD) Butonul ANGLE Butonul PLAY/PAUSE Butonul OPEN/CLOSE Functiile radio 48 Butonul SEARCH+ 49 Butonul SEARCH50 Butonul MEMORY 51 Butonul STOP 52 Butonul MO/ST 53 Butonul AUTO 54 Butonul RADIO + 55 Butonul RADIO – FUNCTIONAREA Toate functiile aparatului sunt accesibile de pe telecomanda Toate instructiunile sunt
Pentru a regla volumul ,apasati butoanele VOL+ sau VOL- (18) Pentru a regla volumul la fiecare difuzor separat ,apasati butonul CH-LEVEL(23) .Apoi apasati butoanele VOL+ sau VOL – (18) Pentru a selecta tonul (bass/inalte) apasati butonul TONE(22) .Pentru reglajul tonului ,apasati butonul VOL+ sau VOL-(18) Pentru a comuta efectele sonore (concert/living/hall/bath/cave/arena/church),apasati butonul S.EFFECT (20).Apasati butonul inca o data pentru a iesi din aceasta functie.
Apasati butoanele sageti (19) pentru a alege un parametru din menu. Apasati ENTER pentru a selecta parametrul. In timpul redarii urmatoarele functii sunt accesibile: Pentru a selecta un capitol (DVD) sau o melodie (CD) ,apasati butoanele digitale (16). Pentru a selecta capitolul anterior sau urmator (DVD) sau melodia (CD) apasati butonul PREV(42) sau NEXT(43). Pentru cautare inainte sau inapoi pe DVD apasati butonul FWD(31) sau REV(32).Vitezele posibile sunt :2x,4x,8x,16x,32x.
- Timp disc - Capitol - Titlu - Timp Capitol - Timp Titlu. Intrarile posibile pentru CD sunt: - Timp Melodie - Melodie Specifica Apasati butoanele digitale pentru a alege selectia. Folosirea functiei PROGRAM Apasati butonul PROGRAM (30) pentru a intra in functia PROGRAM Apasati butoanele digitale pentru a selecta melodia dorita, si folositi butoanele sageti sus jos pentru a selecta intrarea urmatoare.
Pentru inversarea imaginii vertical sau orizontal ,apasati butoanele sageti sus/jos(19) Pentru rotirea imaginii stanga sau dreapta ,apasati butoanele sageti stanga/dreapta(19). NOTA: Derularea imaginilor(Slide Show ) se opreste in modul zoom.Rotatia imaginii si efectele de imagine nu sunt active in modul zoom. Folosirea functiei redare CD Video Apasati butonul PBC (29) pentru a comuta pe functia redare. Introduceti un CD Video Pentru a porni redarea apasati butonul PLAY/PAUSE(46) o data.
Datorita marei varietati de produse cu porturi USB si fabricanti cu functii specifice nu se poate niciodata garanta ca acest aparat va recunoaste toate dispozitivele USB. 5.6 Functiile SD/MMC Dupa ce ati conectat dispozitivul ,menu continut se afiseaza pe ecranul TV. Apasati butoanele sageti sus/jos (19) pentru a selecta un folder sau un fisier. Apasati butonul ENTER (24) pentru intra in folderul sau fisierul selectat.
In sectiunea LAST MEMORY apasati buroanele sageti pentru a porni sau opri aceasta functie.Cand este pornita aparatul isi aminteste ultimul timp de redare al discului. Pagina Programare Audio Programarea audio Analog. DOWNMIX:Alegeti LT/RT pentru mixarea canalelor 5.1 in canale stereo stangadreapta.Alegeti STEREO pentru a mixa canalele 5.1 in semnal audio stereo. NOTA: Aceasta functie este valabila pentru discurile avand 5.1 canale in format Dolby AC-3.
GAMMA: regleaza intensitatea culorii. LUMA DELAY: Compenseaza intarzierea semnalului de culoare Pagina Programare Preferinta NOTA: Functiile generale ale sistemului pot sa fie fixate pe un player fara disc. TIP TV Alegeti formatul iesire video pentru a se potrivi la sistemul TV :PAL,MULTI sau NTSC. PBC(Controlul Redarii) Comutati aceasta functie pe ON sau OFF. NOTA: Aceasta functie este active la VCD 2.0,SVCD,etc.
Problema Sunet lipsa sau incomplet Nu se alimenteaza Functionare defectuoasa Radio Zgomot sau sunet distorsionat pe posturile FM Indicatorul FM stereo nu se aprinde Actiunea Verificati daca echipamentul extern este conectat corect si este pornit. Verificati cablurile si conectarea lor Verificati daca ati selectat corect sursa. Verificati volumul si daca nu este actionat mutingul Verificati daca cablul de retea este corect conectat la retea Verificati daca butonul de retea de pe panoul spate este pornit.
Imaginea nu acopera ecranul Redarea MP3 Lipsa sunet sau sunet incomplet Alegeti formatul de ecran din menu setup(programare) Alegeti formatul ecran din menu de start al discului Daca MP3 este amestecat cu alte fisiere pe CD ,aparatul poate sa redea fisierele MP3 ca zgomot fara sunt sau sa rejecteze discul Verificati daca fisierele MP3 redate sunt in format corect sau alegeti alt fisier pentru redare. Redarea USB Nu reda Dispozitivul USB nu este conectat sau nu este conectat corect in slot.
Distorsiuni Sistem televiziune Raspuns in frecventa Cod regiune Sistem difuzoare Parametru Impedanta Material carcasa Lungime fire Generale Telecomanda Tipuri disc redate Formate imagine Formate Video Formate audio Temperature de lucru Umiditate > -60 dB( 1kHz) PAL/NTSC 20 Hz ~ 20 kHz 2 valoare 4 ~ 16 ohmi lemn 100 cm baterii 2 x 1,5 V tip AAA DVD/DVD-R/DVD-RW/CD-R/CD-RW/DIVX /SVCD/VCD/CD-DA JPEG/Kodak Picture CD MPEG1,MPEG2,MPEG4,WMA,AVI MPEG 1 Layer I,II,III PCM Dolby Digital,MP3 - 10 ~ 40 C 5% - 90 % 9
Microset: Radio / DVD-player with USB-port and Cardreader AMD20 User manual Gebruiksaanwijzing Manuel de l’utilisateur Manual de instrucciones Gebrauchsanleitung Οδηγίες χρήσεως GB 2 NL 29 FR 57 ES 85 DE 113 EL 144
Table of contents 1. 2. 3. 4. 5. 6. Safety............................................................................ 3 1. Sa 1.1 Int 1.1 1.2 1.3 Intended use.....................................................................3 Labels in this manual........................................................3 General safety instructions...............................................4 The DVD Mic from DVDs a CDs. Read th 2.1 2.2 Unpacking............................................................
.............. 3 AMD20 1. Safety 1.1 Intended use ..................3 ..................3 ..................4 The DVD Micro System plays music from CDs and music, videos and photos from DVDs and USB. The appliance also plays photos from Kodak picture CDs. Read the manual carefully before the first use. ..................4 ..................5 i Due to the great variety of products with external memory connection (USB, SD/MMC, etc.
i A note gives additional information, e.g. for a procedure. 1.3 General safety instructions ! WARNING Do not put force on the appliance. The appliance can fall and can cause serious injury. ! CAUTION Do not spill any liquid on the appliance. ! WARNING Do not insert any objects in the ventilation holes. ! CAUTION Do not block the ventilation holes. i This appliance is double insulated; therefore no earth wire is required.
AMD20 e. i We recommend that you retain the original carton and packing materials in case it ever becomes necessary to return your product for service. This is the only way to safely protect the product against damage in transit. If you do dispose of the carton and the packing materials, please remember to recycle with due care to the environment. all and can 2.
i 3.1 This appliance is equipped with rubber feet to prevent it from moving. The feet are made from non-migrating material specially formulated to avoid leaving any marks or stains on furniture. However, certain types of furniture polishes, wood preservatives or cleaning sprays cause the rubber to soften and leave marks or a residue on the furniture, and potentially risk the surface to become damaged.
it from al specially niture. servatives or marks or a e to become recommend rubber feet akers close AMD20 Connection to speakers ● Press the latches to open the terminals. Keep the latches depressed. ● Connect the wire ends to the speakers matching the (+) and (-) polarity markings. ● Release the latches to lock the wire ends. Connection to the appliance ● Press the latches to open the terminals. ● Connect the wire ends of the speakers to the appliance matching the (+) and (-) polarity markings.
Audio connections (input) ● Stereo audio: Connect a suitable cable to the R/L channels of the LINE IN connection. Audio connections (output) The appliance has the following audio outputs: ● Stereo audio: Connect a suitable cable to the R/L channels of the AUDIO OUT connection. ● Coaxial digital audio: Insert a suitable cable into the COAXIAL AUDIO OUT connection. Video connections The video connections allow you to send to video signal (still images or movies) to a connected TV.
AMD20 the LINE IN 3.3 Remote control Install batteries the AUDIO L AUDIO ages or ence): s of the ● Remove the battery cover. ● Insert the batteries matching the (+) and (-) polarity markings. ● Re-install the battery cover. ! CAUTION Incorrect installation can cause battery leakage and corrosion which will damage the appliance. Corrosion, oxidation, battery leakage and any other gradually acidic defect of this nature will invalidate the guarantee. on. onnection.
4. Functions Back pane 4.1 DVD Micro System 14 Master po 13 12 11 10 9 8 1 Front panel 1 2 3 4 5 6 7 8 9 10 11 12 13 10 2 3 4 Standby button Display Disc tray Remote sensor Headphone jack USB slot Memory card slot Cover for connection of external devices Previous track/chapter button Next track/chapter button Volume dial Play/Pause button Open/close button 5 6 7 4.
AMD20 Back panel 14 14 Master power switch 13 12 6~16 ohm LINE INPUT 11 10 9 8 4.2 Remote control General functions 15 16 17 18 19 20 21 22 23 24 25 26 Standby button Digit buttons (0-10+) SETUP button VOLUME +/- button Arrow buttons SOUND EFFECT button (S.
5.
AMD20 5. 47 46 45 44 43 42 41 40 39 38 Operation All functions of the appliance are accessible using the remote control. All instructions refer to operation with the remote control, unless indicated otherwise. 5.1 Master power switch The appliance is equipped with a master power switch (14) located at the back panel. ● Set the switch into the ON position prior to taking the appliance into operation. ● Set the switch into the OFF position prior to disconnecting from the mains.
● To select the tone (bass/treble), press the TONE button (22). To adjust the tone, press the VOL + button or the VOL - button (18). ● To switch between sound effects (concert/living/hall/bath/cave/arena/ church), press the S.EFFECT button (20). Press the button once again to exit this function. ● To mute or restore sound, press the MUTE button (27). ● To connect a headphone, insert the cable plug in the headphone jack (5). To prevent hearing damage, remember to adjust the volume to a comfortable level.
AMD20 To adjust the e/arena/ nce again to one jack (5). oa ess the ions" further tton (48) or und. ns" further on connected he USB s" further on be ● Select the DVD mode. Then select the correct function with the USB button (21). ● To start playback, press the PLAY/PAUSE button (46) once. ● For extended instructions, read the paragraph "SD/MMC functions" further on in this manual. 5.3 DVD/CD functions After the disc has been loaded, a content menu will display on the TV screen.
i ● Normally, if an MP3 disc is loaded, the unit will take longer time to read the initial data. ● A DVD that does not match the region code cannot be read by this appliance. ● If a disc contains mixed content (e.g. MP3 and video files), the appliance will only recognise, list and play one content type. ● The screen saver becomes active if no disc has been loaded for 3 minutes, or if the appliance has been in STOP mode for 3 minutes.
me to read y this e appliance for minutes. nt on a DVD . arrow button light to NTER. on of a DVD. point (A). AMD20 ● Press the A-B REPEAT button again to select the ending point (B). The appliance plays the section repeatedly. ● To cancel the A-B REPEAT function, press the A-B REPEAT button again. The appliance will resume the normal playback. Using the ZOOM function This function can be used for zooming in and out on photos and DVDs. The available zoom ratios are: 2x, 3x, 4x, 1/2, 1/3, 1/4.
Using the Video CD playback function ● ● ● ● Press the PBC button (29) to switch on the playback function. Insert a Video CD. To start playback, press the PLAY/PAUSE button (46) once. Press the PBC button (29) to quit the playback and return to the main menu. 5.4 Radio functions ● To search for frequencies automatically, press the AUTO button (53). ● To fine tune the frequency, press the SEARCH + button (48) or the SEARCH - button (49). ● To select a preset station, press the digit buttons (16).
. he main on (53). or the 54) or the P button (51). T button (52). 48) or the und. to save the y on the TV AMD20 During playback, the following functions are available: ● To select a track, press the PREV button (42) or the NEXT button (43) until the desired track is set. ● To pause playback, press the PLAY/PAUSE button (46) once; to resume playback, press the button again. ● To stop playback, press the STOP button (38). ● To remove the device, gently pull it out of the slot.
● Press the SETUP button (17). ● Press the arrow buttons (left and right) (19) to select a menu. The submenu is displayed directly. ● Press the arrow buttons (up and down) to enter the submenu. ● Press the ENTER button (24) to select a setting, or the left arrow button to cancel the selection. ● Press the SETUP button to store the settings and exit. General setup page ● In the TV DISPLAY section, press the arrow buttons to select 4:3 PANSCAN or 4:3 LETTERBOX for a conventional TV set.
AMD20 Digital audio setup row button to 4:3 ect 16:9 or ch this s the angle the to switch this s hidden text witch the tch this mbers the annel and ignal stereo. 5.1-channel DIGITAL OUTPUT ● Select SPDIF OFF to switch off the digital audio signal output. ● Select SPDIF RAW to set the digital audio signal output to its raw format (DTS/Dolby Digital 5.1). ● Select SPDIF PCM to set the digital audio signal output to PCM format.
i ● The composite video output is the default setting for video output. ● If the video output results in a poor image, then press the V-Mode button (26) until the image is good. COLOUR SETTING ● SHARPNESS: Adjust the screen sharpness. ● BRIGHTNESS: Adjust the screen brightness. ● GAMMA: Adjust the colour intensity. ● LUMA DELAY: Compensate the delay in the colour signal. Preference setup page i The general system functions can only be set with an empty DVD player.
put. Mode button empty DVD TV system: menu. AMD20 DEFAULT ● Restore the default settings of the appliance. Password setup page ● PASSWORD MODE: Switch the password function on or off. Enter the correct password to switch the mode on or off. ● PASSWORD: Change the default password. Enter the current password in the first box. Enter the new password in the second box. Enter the new password again in the third box to confirm. 6.
7. Troubleshooting Trouble Action No sound or incomplete audio Check if the random equipment are switched on and set correctly. Check cables for connection problems. Check if the correct source is selected. Check volume or mute setting. No power Check if the power cord has been properly connected to the power outlet. Check if the master power switch on the back panel is ON. Malfunction Should the appliance develop a serious malfunction, unplug the appliance for 30 minutes.
AMD20 witched on and . . perly he back panel s malfunction, After this, factory ning control. Extend the rong stations. Remove the disc and leave the appliance powered on for one or two hours. No sound or incomplete audio Select another audio track. During SCAN, SLOW MOTION or SINGLE STEP the sound is muted. No scan or skip possible Some discs are programmed to refuse user action at certain sections. This is no malfunction. Single chapter or track discs do not allow skip function.
AUX Trouble Action No sound on the unit system. Input source is low. Increase the volume level on the audio source device. No picture Check if the TV is switched on and set to the correct A/V input. Check cables for connection problems. Check cables for damage. Remote control (RC) Trouble RC does not function 8.
AMD20 Disc output me level on the to the correct . nsor.
9. isposal of used electrical D and electronic equipment Z The meaning of the symbol on the material, its accessory or packaging indicates that this product shall not be treated as household waste. Please, dispose of this equipment at your applicable collection point for the recycling of electrical and electronic equipments waste. In the European Union and Other European countries which there are separate collection systems for used electrical and electronic product.