AMD320 manual o o o o o o o o o o o o o o o o o o Index 1. Intended use 2. Safety 2.1. Labels in this manual 2.2. General safety instructions 3. Preparations for use 3.1. Unpacking 3.2. Package contents 4. Installation 4.1. Install batteries 4.2. Connecting the system 4.3. Connecting random equipment 4.4. Connecting to the mains 5. Functions 5.1. Remote control 5.2. AMD320 Microset 6. Operation 6.1. Quick start 6.2. General setup menu operation 6.3. DVD/CD functions 6.4.
1.Intended use The Microset plays music from CDs, and music, videos and photos from DVDs and USB. The appliance shows photos from Kodak picture CDs as well. The appliance also offers the option to rip CDs. The Microset can be operated via Bluetooth. Read the manual with care before using it for the first time. The DVD Microset plays music from CDs and music, videos and photos from DVDs and USB. The Microset can be controlled by bluetooth. Read the manual carefully before the first use.
2.2. General safety instructions WARNING Do not put force on the appliance. The appliance can fall and can cause serious injury. CAUTION Do not spill any liquid on the appliance. WARNING Do not insert any objects in the ventilation holes. CAUTION Do not block the ventilation holes. This appliance is double insulated; therefore no earth wire is required. Always check that the mains voltage corresponds to the voltage on the rating plate. This appliance employs a laser system.
3.Preparations for use 3.1. Unpacking Unpack the appliance carefully. Check the package contents as described below. If any item is missing, please contact your reseller. Remove the labels from the front panel carefully if present. We recommend that you retain the original carton and packing materials in case it ever becomes necessary to return your product for service. This is the only way to safely protect the product against damage in transit.
4.Installation 4.1. Install batteries Install batteries Remove the battery cover. Insert the batteries matching the (+) and (-) polarity markings. CAUTION Incorrect installation can cause battery leakage and corrosion which will damage the appliance. Corrosion, oxidation, battery leakage and any other gradually acidic defect of this nature will invalidate the guarantee. 4.2. Connecting the system Connect the speakers to the appliance.
4.3. Connecting random equipment Connect the tv Use one of the cables as presented in the image below. 4.4. Connecting to the mains Connect the appliance to the mains. Switch on the appliance.
5.Functions 5.1. Remote control 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20.
21. 22. 23. 24. 25. 26. 27. 28. 29. 30. 31.
5.2. AMD320 Microset 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. PLAY/ PAUSE DISPLAY SCREEN REMOTE CONTROL SENSOR PREVIOUS STOP NEXT VOLUME +/SOURCE STANDBY AUX IN USB 2.
6.Operation All functions of the appliance are accessible using the remote control. All instructions refer to operation with the remote control, unless indicated otherwise. 6.1. Quick start General functions Set the appliance in the standby mode. To switch on the appliance, press the STANDBY button (1). To switch back to the standby mode, press the STANDBY button (1) again. To adjust the volume, press the VOL + button or the VOL - button (24). To mute or restore sound, press the MUTE button (20).
The display shows the total number of tracks on the CD. To start playback, press the PLAY/PAUSE button (4) once. To stop playback, press the STOP button (31). For extended instructions, read the paragraph DVD/CD functionsfurther on in this manual. Tuner functions Switch on the appliance. To select the source mode TUNER, press the SOURCE button (22). AUX To select the source mode AUX, press the SOURCE button (22). Connect the external appliance to your AMD320 Mircoset.
6.2. General setup menu operation This chapter explains a complete setup of the appliance: settings of screen display, audio setup and video setup. General settings menu To change the initial settings The following actions have to be carried out with the remote control. Press the SETUP button (5). Press the arrow buttons (left and right) (12) to select a menu. The submenu is displayed directly. Press the arrow buttons (up and down) (11) to scroll through the submenu.
OSD LANG In the OSD LANG section, press the arrow buttons to choose the language. Screensaver on/off The screensaver will be turned on automatically when there is no picture. Last memory: on/off When the DVD is paused, playback will automatically resume from where last stopped. VIDEO Colour settings RESOLUTION: select the desired resolution. SHARPNESS: Adjust the screen sharpness. BRIGHTNESS: Adjust the screen brightness. CONTRAST: Adjust the contrast of the image. HUE: Adjust the colour intensity.
SET PASSWORD Change the default password. Enter the current password in the first box. Enter the new password in the second box. Enter the new password again in the third box to confirm. The default password (0000) is always active. Even if the password has been reset. DEFAULT Restore all default settings of the appliance, except the settings for the menu items PARENTAL and PASSWORD.
6.3. DVD/CD functions Preparation Turn on the television. After the disc has been loaded, a content menu will display on the TV screen. Press the arrow buttons (11) to select a menu item. Press the ENTER button (26) to enter the selected menu item. During playback, the following functions are available: To select a chapter (DVD) or track (CD), press the digit buttons (2).
To repeat a chapter (DVD) or one or all tracks (CD): - Press the REPEAT button (16) once to repeat the current chapter or track. To view a specific title of a DVD, press the TITLE button (10). Use the arrow buttons to select the title. To switch on the subtitles of a DVD, press the SUBTITLE button (25). Press the button again to switch off the subtitles. To select the camera angle, press the ANGLE button (19).
Using the ZOOM function This function can be used for zooming in and out on photos and DVDs. The available zoom ratios are: 2x, 3x, 4x, 1/2, 1/3, 1/4. Press the ZOOM button (30). Press the ZOOM (30) button again to set the correct size. Press the arrow buttons (11) to move through the picture. Using the Kodak picture CD playback function Insert a Kodak picture CD. Press the STOP button (31) to enter the thumbnail mode.
6.4. Radio functions Press the SOURCE button (22) to select the tuner mode. To switch between Mono and Stereo reception, press the MO/ST button (27). Touch MEMORY (12) to add the current station to your favourites. Use the number buttons to determine the preset position. Start with a 0 for numbers under ten. Quick installation of the list of stations: Press 3 seconds on the key AUTO (25) to start the search programme for automatically setting the available channels.
6.5. USB functions Preparation Turn on the television. Insert the USB device in the slot . The device can only be connected one way. Press the USB button (15). After the device has been connected, a content menu will display on the TV screen. Press the arrow button (up and down) to select a folder or a file. Press the ENTER button (26) to enter the selected folder or file. You can also use the digit buttons (2) to select a folder or to play the file.
6.6. LINE-IN Connect the external appliance to your AMD320 Microset. To select the source mode LINE-IN, press the SOURCE button (22).
6.7. Operation with BLUETOOTH You can wirelessly connect the AMD320 to devices that have Bluetooth A2DP. Establishing a Bluetooth connection (PAIREN) Turn on the Bluetooth function of your device To select the source mode BLUETOOTH, press the SOURCE button (22). Press and hold the button PLAY/ PAUSE (4) to activate the Bluetooth pairing mode.
7.Cleaning and maintenance WARNING Before performing any cleaning or maintenance, switch off and unplug the appliance. Clean the outside of the appliance with a soft cloth. When the appliance is very dirty, dampen the cloth slightly with water and a neutral solution. 7.1. Handle and care of a disc Hold the disc with fingers. Hold the disc outer edge and/or the centre spindle hole. Do not touch the disc surface. Do not bend or press the disc.
8.
9.Disposal of used electrical and electronic equipment The meaning of the symbol on the material, its accessory or packaging indicates that this product shall not be treated as household waste. Please, dispose of this equipment at your applicable collection point for the recycling of electrical and electronic equipments waste. In the European Union and Other European countries which there are separate collection systems for used electrical and electronic product.